> Hi Khalid, > > my setup is almost identical > > except for > loadzone = be > defaultzone = be > > (obviously) > > and in > > chan_dahdi.conf: > > [isdn4] > signaling = bri_cpe_ptmp > switchtype = euroisdn > group = 2 > context = isdn > dahdichan = 10,11 > > > this results into: > > ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI Span: 4 Unable > to receive TEI from network in state 2(Assign awaiting TEI)! > > and after trying to call: > > May 9 21:25:51] NOTICE[1021]: chan_dahdi.c:3136 > my_handle_dchan_exception: PRI got event: Alarm (4) on D-channel of > span 4 > [May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms: > Detected alarm on channel 10: Red Alarm > [May 9 21:25:51] WARNING[1022]: chan_dahdi.c:7895 handle_alarms: > Detected alarm on channel 11: Red Alarm > [May 9 21:25:53] ERROR[1021]: chan_dahdi.c:14182 dahdi_pri_error: PRI > Span: 4 Unable to receive TEI from network in state 3(Establish > awaiting TEI)! > [May 9 21:25:53] NOTICE[1021]: chan_dahdi.c:3136 > my_handle_dchan_exception: PRI got event: No more alarm (5) on > D-channel of span 4 > [May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms: > Alarm cleared on channel 10 > [May 9 21:25:53] NOTICE[1022]: chan_dahdi.c:3826 handle_clear_alarms: > Alarm cleared on channel 11 > > > An old Asterisk 1.4 installation with mISDN connected to the same > line used ptp, not ptmp. When I used bri_cpe_ptp, I get even more > problems on the console however (every second).
bri_cpe_ptp is not a valid value for the signaling parameter. >From chan_dahdi.conf.sample: ; bri_cpe: BRI PTP signalling, CPE side ; bri_net: BRI PTP signalling, Network side ; bri_cpe_ptmp: BRI PTMP signalling, CPE side ; bri_net_ptmp: BRI PTMP signalling, Network side Richard -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
