In case the moderator doesn't approve my post with the attachment, below
is a quick and dirty transcription of the order form.
Customer connecting equipment: CSU/DSU
Circuit: DS1
Line coding: B8ZS
Framing: ESF
Jack type: RJ48X / Smartjack (will that fit into the Digum card?)
ISDN protocol: NI2
Primary D-channel assignment: 24
FAS
Incoming port selection: Ascending sequential 1-24
Indound real-time ANI delivery? yes, 10 digits
Does anyone see any red flags or things to watch out for in these specs?
Anyone configured a similar line that is willing to share your config
files?
I'm traveling for the next several hours, so apologies if I don't
respond right away.
Mitch
On 10/10/2012 10:34 AM, Mitch Claborn wrote:
Tomorrow evening I'll be at a customer site installing 2 Digum cards - a
4 port analog and 2 port T1. I'd appreciate any tips, resources and
links that you have that might help if we run into trouble. It will, of
course, be fairly late at night and relatively high pressure to get it
working, so I'd like to collect as much information in advance as I can.
I was able to install and test the analog card in my lab, so not too
worried about that.
I installed the T1 card in the lab and got the system and Asterisk to
recognize it, but had no T1 to test with.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
