We have set directmedia=yes as well as directmedia=no. There is no NAT involved.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Leandro Dardini Sent: Thursday, December 27, 2012 1:08 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 Pass-through Have you configured the canreinvite=yes in sip peer? I am currently off work for two days, but a 100% fail means a configuration problem for sure. Leandro 2012/12/27 Eric Wieling <[email protected]> We are offering $100 (paid via paypal or check) to the first person who assists us in successfully sending and receiving faxes in the setup described below. Offer expires Dec 31. We are a direct customer of Level 3, there is no other carrier involved. What we want to work: Level 3 T.38 TN <-> MSX/Nextone SBC <-> Asterisk 1.8.18.1 <-> Adtran NetVanta w/POTS and T.38 support. When we replace Asterisk with Kamailio faxes work fine. When we put Asterisk there instead, then faxes fail nearly 100% of the time. I see the switch to T.38 in the Adtran debug logs. We can originate and terminate T.38 calls in Asterisk using SendFax/ReceiveFax using T.38 so I'm assuming I have my udptl.conf and sip.conf settings correct. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
