We have directrtpsetup=no because the comments in the sample config indicates 
it does not work in all situations.

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Christopher 
Harrington
Sent: Thursday, December 27, 2012 1:13 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 
Pass-through

directrtpsetup=yes in sip.conf?



On Thu, Dec 27, 2012 at 12:09 PM, Eric Wieling <[email protected]> wrote:


        We have set directmedia=yes as well as directmedia=no.  There is no NAT 
involved.
        



        -----Original Message-----
        From: [email protected] 
[mailto:[email protected]] On Behalf Of Leandro Dardini
        Sent: Thursday, December 27, 2012 1:08 PM
        To: Asterisk Users Mailing List - Non-Commercial Discussion
        Subject: Re: [asterisk-users] $100 Bounty: Level3/Asterisk/Adtran T.38 
Pass-through
        
        Have you configured the canreinvite=yes in sip peer?
        
        I am currently off work for two days, but a 100% fail means a 
configuration problem for sure.
        
        
        Leandro
        
        
        2012/12/27 Eric Wieling <[email protected]>
        
        
                We are offering $100 (paid via paypal or check) to the first 
person who assists us in successfully sending and receiving faxes in the setup 
described below.  Offer expires Dec 31.  We are a direct customer of Level 3, 
there is no other carrier involved.
        
                What we want to work:
        
                    Level 3 T.38 TN <-> MSX/Nextone SBC <-> Asterisk 1.8.18.1 
<-> Adtran NetVanta w/POTS and T.38 support.
        
                When we replace Asterisk with Kamailio faxes work fine.  When 
we put Asterisk there instead, then faxes fail nearly 100% of the time.
        
                I see the switch to T.38 in the Adtran debug logs.   We can 
originate and terminate T.38 calls in Asterisk using SendFax/ReceiveFax using 
T.38 so I'm assuming I have my udptl.conf and sip.conf settings correct.
        
        
        
                --
                
_____________________________________________________________________
                -- Bandwidth and Colocation Provided by 
http://www.api-digital.com --
                New to Asterisk? Join us for a live introductory webinar every 
Thurs:
                               http://www.asterisk.org/hello
        
                asterisk-users mailing list
                To UNSUBSCRIBE or update options visit:
                   http://lists.digium.com/mailman/listinfo/asterisk-users
        
        
        
        
        --
        _____________________________________________________________________
        -- Bandwidth and Colocation Provided by http://www.api-digital.com --
        New to Asterisk? Join us for a live introductory webinar every Thurs:
                       http://www.asterisk.org/hello
        
        asterisk-users mailing list
        To UNSUBSCRIBE or update options visit:
           http://lists.digium.com/mailman/listinfo/asterisk-users
        




-- 
-Chris Harrington

ACSDi Office: 763.559.5800
Mobile Phone: 612.326.4248

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to