hi,
strange behaviour while trying to use pri debugging on asterisk 11.x ...
please take a look:
bas1104*CLI> pri show version
libpri version: 1.4.13
bas1104*CLI> dahdi show version
DAHDI Version: 2.6.1 Echo Canceller: HWEC
bas1104*CLI> help pri
*pri intense debug span*<no description available>
pri service disable channel Remove a channel from service
pri service enable channel Return a channel to service
*pri set debug {on|off*|hex|inte Enables PRI debugging on a span
pri set debug file Sends PRI debug output to the specified file
pri show channels Displays PRI channel information
*pri show debug*Displays current PRI debug settings
pri show spans Displays PRI span information
pri show span Displays PRI span information
pri show version Displays libpri version
bas1104*CLI> help dahdi
dahdi destroy channel Destroy a channel
dahdi restart Fully restart DAHDI channels
dahdi set dnd Sets/resets DND (Do Not Disturb) mode on
a channel
dahdi set hwgain Set hardware gain on a channel
dahdi set swgain Set software gain on a channel
dahdi show cadences List cadences
dahdi show channels [group|con Show active DAHDI channels
dahdi show channel Show information on a channel
dahdi show status Show all DAHDI cards status
dahdi show version Show the DAHDI version in use
/
//currently all debug off:/
bas1104*CLI> pri show debug
Span 1: Debug: No Intense: No
Span 2: Debug: No Intense: No
Span 3: Debug: No Intense: No
Span 4: Debug: No Intense: No
/
//switching it on (which currently works as expected)/
bas1104*CLI> pri intense debug span 1
Enabled debugging on span 1
/
//
//oops, still shows no debug.... but it IS activated.../
bas1104*CLI> pri show debug
Span 1: Debug: No Intense: No
Span 2: Debug: No Intense: No
Span 3: Debug: No Intense: No
Span 4: Debug: No Intense: No
/
//huh... how to disable it again? on some machines I can do so with "pri
no debug span <nr>" but not here... gives same result (no//
//such command) and debug is still enabled.../
bas1104*CLI> pri set debug off
No such command 'pri set debug off' (type 'core show help pri set' for
other possible commands)
bas1104*CLI>
so... whats the right way to disable pri debugging?
thx,
yves
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
