thanks, that command syntax works.
yves
Am 11.04.2013 18:51, schrieb Richard Mudgett:
----- Original Message -----
hi,
strange behaviour while trying to use pri debugging on asterisk 11.x
...
please take a look:
bas1104*CLI> pri show version
libpri version: 1.4.13
bas1104*CLI> dahdi show version
DAHDI Version: 2.6.1 Echo Canceller: HWEC
bas1104*CLI> help pri
pri intense debug span <no description available>
pri service disable channel Remove a channel from service
pri service enable channel Return a channel to service
pri set debug {on|off |hex|inte Enables PRI debugging on a span
pri set debug file Sends PRI debug output to the specified file
pri show channels Displays PRI channel information
pri show debug Displays current PRI debug settings
pri show spans Displays PRI span information
pri show span Displays PRI span information
pri show version Displays libpri version
bas1104*CLI> help dahdi
dahdi destroy channel Destroy a channel
dahdi restart Fully restart DAHDI channels
dahdi set dnd Sets/resets DND (Do Not Disturb) mode on a channel
dahdi set hwgain Set hardware gain on a channel
dahdi set swgain Set software gain on a channel
dahdi show cadences List cadences
dahdi show channels [group|con Show active DAHDI channels
dahdi show channel Show information on a channel
dahdi show status Show all DAHDI cards status
dahdi show version Show the DAHDI version in use
currently all debug off:
bas1104*CLI> pri show debug
Span 1: Debug: No Intense: No
Span 2: Debug: No Intense: No
Span 3: Debug: No Intense: No
Span 4: Debug: No Intense: No
switching it on (which currently works as expected)
bas1104*CLI> pri intense debug span 1
Enabled debugging on span 1
oops, still shows no debug.... but it IS activated...
It activated a different mode of debug than what you expected
because that command is an alias that was not updated.
bas1104*CLI> pri show debug
Span 1: Debug: No Intense: No
Span 2: Debug: No Intense: No
Span 3: Debug: No Intense: No
Span 4: Debug: No Intense: No
huh... how to disable it again? on some machines I can do so with
"pri no debug span <nr>" but not here... gives same result (no
such command) and debug is still enabled...
bas1104*CLI> pri set debug off
No such command 'pri set debug off' (type 'core show help pri set'
for other possible commands)
bas1104*CLI>
so... whats the right way to disable pri debugging?
The correct command is "pri set debug {on|off|intense} span x".
The "pri intense debug span x" command is an alias for
"pri set debug 2 span x" that didn't get updated when the real
command was changed to "pri set debug intense span x".
This will show the help you need:
bas1104*CLI> help pri set debug off span
Richard
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
