This means i can't use IPv4 and IPv6 together.
Right?
El 27/09/2013 11:25, Eric Wieling escribió:
>From sip.conf.sample included in your Asterisk source tree. See item c) and
the Note:
; With the current situation, you can do one of four things:
; a) Listen on a specific IPv4 address. Example: bindaddr=192.0.2.1
; b) Listen on a specific IPv6 address. Example: bindaddr=2001:db8::1
; c) Listen on the IPv4 wildcard. Example: bindaddr=0.0.0.0
; d) Listen on the IPv4 and IPv6 wildcards. Example: bindaddr=::
; (You can choose independently for UDP, TCP, and TLS, by specifying different
values for
; "udpbindaddr", "tcpbindaddr", and "tlsbindaddr".)
; (Note that using bindaddr=:: will show only a single IPv6 socket in netstat.
; IPv4 is supported at the same time using IPv4-mapped IPv6 addresses.)
;
; You may optionally add a port number. (The default is port 5060 for UDP and
TCP, 5061
; for TLS).
; IPv4 example: bindaddr=0.0.0.0:5062
; IPv6 example: bindaddr=[::]:5062
;
; The address family of the bound UDP address is used to determine how Asterisk
performs
; DNS lookups. In cases a) and c) above, only A records are considered. In case
b), only
; AAAA records are considered. In case d), both A and AAAA records are
considered. Note,
; however, that Asterisk ignores all records except the first one. In case d),
when both A
; and AAAA records are available, either an A or AAAA record will be first, and
which one
; depends on the operating system. On systems using glibc, AAAA records are
given
; priority.
udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to
(0.0.0.0 binds to all)
; Optionally add a port number,
192.168.1.1:5062 (default is port 5060)
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Daniel van den
Berg
Sent: Friday, September 27, 2013 12:18 PM
To: [email protected]
Subject: Re: [asterisk-users] How to bind to ipv4 & ipv6
Hi All,
I dont really see a solution there to the problem, just that the matter was
discussed?
Can Asterisk or can it not listen for IPv4 & IPv6 addresses at the same time? I
only see that there is mention that you must use the bindaddr=::
for it to listen for IPv4 & IPv6 but when I do this my IPv4 connections drops.
Thanks!
On 09/27/2013 05:59 PM, Johan Wilfer wrote:
http://lists.digium.com/pipermail/asterisk-users/2013-March/278122.htm
l
Google :-)
/J
2013-09-27 17:47, Daniel van den Berg skrev:
Hi Asghar,
How do I search the site as I dont see a search bar anywhere...could
you please give me the link to the solution in the list or educate me
on how to search the site bar going through every thread one by one.
:)
Thanks!
Regards,
On 09/27/2013 04:43 PM, Asghar Mohammad wrote:
Hi,
Please Search the List there is already a post and solution.
On Fri, Sep 27, 2013 at 3:58 PM, Daniel van den Berg
<[email protected] <mailto:[email protected]>> wrote:
Hi All,
This is my 1st post so lets go.
What I need to achieve is the following. I have server with both
IPv4
addresses and IPv6 addresses. The problem that I am encountering
is that
in the sip.conf I am having difficulties to bind to both the
IPv4 and
IPv6 addresses.
Can someone please assist me in this regard as I need to connect
another
server to this server on IPv6 while the rest of the clients are
connecting on IPv4.
I need to know how to get this working?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by
http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every
Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
