Sorry, I meant item d) which says and I quote "Listen on the IPv4 and IPv6 wildcards. Example: bindaddr=::" and "Note that using bindaddr=:: will show only a single IPv6 socket in netstat. . IPv4 is supported at the same time using IPv4-mapped IPv6"
-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Bakko Sent: Friday, September 27, 2013 12:28 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] How to bind to ipv4 & ipv6 This means i can't use IPv4 and IPv6 together. Right? El 27/09/2013 11:25, Eric Wieling escribió: > >From sip.conf.sample included in your Asterisk source tree. See item c) and > >the Note: > > ; With the current situation, you can do one of four things: > ; a) Listen on a specific IPv4 address. Example: bindaddr=192.0.2.1 > ; b) Listen on a specific IPv6 address. Example: bindaddr=2001:db8::1 > ; c) Listen on the IPv4 wildcard. Example: bindaddr=0.0.0.0 > ; d) Listen on the IPv4 and IPv6 wildcards. Example: bindaddr=:: > ; (You can choose independently for UDP, TCP, and TLS, by specifying > different values for ; "udpbindaddr", "tcpbindaddr", and > "tlsbindaddr".) ; (Note that using bindaddr=:: will show only a single IPv6 > socket in netstat. > ; IPv4 is supported at the same time using IPv4-mapped IPv6 > addresses.) ; ; You may optionally add a port number. (The default is > port 5060 for UDP and TCP, 5061 ; for TLS). > ; IPv4 example: bindaddr=0.0.0.0:5062 > ; IPv6 example: bindaddr=[::]:5062 > ; > ; The address family of the bound UDP address is used to determine how > Asterisk performs ; DNS lookups. In cases a) and c) above, only A > records are considered. In case b), only ; AAAA records are > considered. In case d), both A and AAAA records are considered. Note, > ; however, that Asterisk ignores all records except the first one. In > case d), when both A ; and AAAA records are available, either an A or > AAAA record will be first, and which one ; depends on the operating system. > On systems using glibc, AAAA records are given ; priority. > > udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to > (0.0.0.0 binds to all) > ; Optionally add a port number, > 192.168.1.1:5062 (default is port 5060) > > > > > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Daniel > van den Berg > Sent: Friday, September 27, 2013 12:18 PM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] How to bind to ipv4 & ipv6 > > Hi All, > > I dont really see a solution there to the problem, just that the matter was > discussed? > > Can Asterisk or can it not listen for IPv4 & IPv6 addresses at the same time? > I only see that there is mention that you must use the bindaddr=:: > for it to listen for IPv4 & IPv6 but when I do this my IPv4 connections drops. > > Thanks! > > On 09/27/2013 05:59 PM, Johan Wilfer wrote: >> http://lists.digium.com/pipermail/asterisk-users/2013-March/278122.ht >> m >> l >> >> Google :-) >> >> /J >> >> 2013-09-27 17:47, Daniel van den Berg skrev: >>> Hi Asghar, >>> >>> How do I search the site as I dont see a search bar anywhere...could >>> you please give me the link to the solution in the list or educate >>> me on how to search the site bar going through every thread one by one. >>> :) >>> >>> Thanks! >>> >>> Regards, >>> On 09/27/2013 04:43 PM, Asghar Mohammad wrote: >>>> Hi, >>>> Please Search the List there is already a post and solution. >>>> >>>> >>>> >>>> On Fri, Sep 27, 2013 at 3:58 PM, Daniel van den Berg >>>> <aster...@suretel.co.za <mailto:aster...@suretel.co.za>> wrote: >>>> >>>> Hi All, >>>> >>>> This is my 1st post so lets go. >>>> >>>> What I need to achieve is the following. I have server with >>>> both >>>> IPv4 >>>> addresses and IPv6 addresses. The problem that I am encountering >>>> is that >>>> in the sip.conf I am having difficulties to bind to both the >>>> IPv4 and >>>> IPv6 addresses. >>>> >>>> Can someone please assist me in this regard as I need to connect >>>> another >>>> server to this server on IPv6 while the rest of the clients are >>>> connecting on IPv4. >>>> >>>> I need to know how to get this working? >>>> >>>> -- >>>> >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by >>>> http://www.api-digital.com -- >>>> New to Asterisk? Join us for a live introductory webinar every >>>> Thurs: >>>> http://www.asterisk.org/hello >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>>> >>>> >>>> >>> >>> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to > Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users