On Tuesday 22 October 2013, Salaheddine Elharit wrote: > hello yes this is a fresh install > > [trunkgroups] > trunkgroup => 1,16 > spanmap => 1,1,1 > > [channels] > #include dahdi-channels.conf > > context=default > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > rxgain=0.0 > txgain=0.0 > > group=1 > switchtype=euroisdn > signalling=pri_cpe > callgroup=1 > pickupgroup=1 > immediate=no > channel => 1-15,17-31 > > the issue h=just with group 1 can not call via G1 > > with group 2 theris no problem > > group=2 > callgroup=2 > switchtype=qsig > signalling=pri_net > callerid=520xxxxxx > immediate=no > channel => 32-46,48-52 > > > thanks and regards
If group 2 works the way you want it to, then it must be configured correctly; meaning you just need to configure group 1 to match group 2. So, *make a backup copy* of your chan_dahdi.conf first, in case this goes horribly wrong and you can't even remember where you started from, and try: group=1 ;switchtype=euroisdn switchtype=qsig ;signalling=pri_cpe signalling=pri_net callgroup=1 pickupgroup=1 immediate=no channel => 1-15,17-31 Then power the server off and on, to make sure DAHDI and Asterisk restart from scratch. If that works, congratulations, you've fixed it. However, I don't think it will. "switchtype=euroisdn" and "signalling=pri_cpe" are the correct settings for plugging into an ISDN-30 exchange line. "pri_net" makes the card behave as though it was the exchange end (like FXS on steroids). Can you post the contents of /etc/dahdi/system.conf ? -- AJS Answers come *after* questions. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users