2013/10/22, A J Stiles <asterisk_l...@earthshod.co.uk>: > On Tuesday 22 October 2013, Salaheddine Elharit wrote: >> hello yes this is a fresh install >> >> [trunkgroups] >> trunkgroup => 1,16 >> spanmap => 1,1,1 >> >> [channels] >> #include dahdi-channels.conf >> >> context=default >> hidecallerid=no >> callwaiting=yes >> usecallingpres=yes >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> canpark=yes >> cancallforward=yes >> callreturn=yes >> rxgain=0.0 >> txgain=0.0 >> >> group=1 >> switchtype=euroisdn >> signalling=pri_cpe >> callgroup=1 >> pickupgroup=1 >> immediate=no >> channel => 1-15,17-31 >> >> the issue h=just with group 1 can not call via G1 >> >> with group 2 theris no problem >> >> group=2 >> callgroup=2 >> switchtype=qsig >> signalling=pri_net >> callerid=520xxxxxx >> immediate=no >> channel => 32-46,48-52 >> >> >> thanks and regards > > If group 2 works the way you want it to, then it must be configured > correctly; > meaning you just need to configure group 1 to match group 2. So, *make a > backup copy* of your chan_dahdi.conf first, in case this goes horribly wrong > > and you can't even remember where you started from, and try: > > group=1 > ;switchtype=euroisdn > switchtype=qsig > ;signalling=pri_cpe > signalling=pri_net > callgroup=1 > pickupgroup=1 > immediate=no > channel => 1-15,17-31 > > > Then power the server off and on, to make sure DAHDI and Asterisk restart > from > scratch. > > > If that works, congratulations, you've fixed it. However, I don't think it > > will. "switchtype=euroisdn" and "signalling=pri_cpe" are the correct > settings > for plugging into an ISDN-30 exchange line. "pri_net" makes the card behave > > as though it was the exchange end (like FXS on steroids). > > Can you post the contents of /etc/dahdi/system.conf ? > > -- > AJS > > Answers come *after* questions. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
hello thanks for your response i have try to do this but the issue still the same NB: the group 1 is for the first provider and the secend is for the secend provider if the issue still the same can i call my provider becouse for the inbound call is ok bat the issue is for the outban calls below etc/dahdi/system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Thu Oct 17 12:37:31 2013 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 echocanceller=mg2,32-46,48-62 # Global data loadzone = fr defaultzone = fr thanks and regards -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users