That did it.

For some reason, Even commented out. Pick up was still *8.  And persisted 
even after an asterisk service restart. Changed the feature to *7, Rebooted 
the whole PBX and it finally took effect.

Nick Olsen
 Network Operations 
(855) FLSPEED  x106

----------------------------------------
From: "Andres" <[email protected]>
Sent: Tuesday, December 31, 2013 2:22 PM
To: [email protected], "Asterisk Users Mailing List - Non-Commercial 
Discussion" <[email protected]>
Subject: Re: [asterisk-users] *8 and SIP

On 12/31/13, 11:23 AM, Nick Olsen       wrote:
          Greetings           all, First time poster, Sorry if this has 
been answered here           before.          
                  We recently replaced a failed 1.4x           asterisk PBX 
at a customer location.         
                  Voicemail access was setup when the           customer 
dialed *8, This worked in 1.4.            I suggest trying command 
'features show' to pinpoint the conflict.

     # asterisk -rx 'features show'

     Builtin Feature           Default Current
     ---------------           ------- -------
     Pickup                    *8             
     Blind Transfer            #       #      
     Attended Transfer                        
     One Touch Monitor                        
     Disconnect Call           *       *      
     Park Call                                
     One Touch MixMonitor                     

     Dynamic Feature           Default Current
     ---------------           ------- -------
     (none)

     Feature Groups:
     ---------------
     (none)

     Call parking (Parking lot: default)
     ------------
     Parking extension     :      700
     Parking context       :      parkedcalls
     Parked call extensions:      701-750
     Parkingtime           :      45000 ms
     MusicOnHold class     :      default
     Enabled               :      Yes

                  Now, Running 1.6 (I know it's old I had           to load 
it quickly, And that's what I got working first. It'll           get 
upgraded to 1.8 soon).         
                  The strange part is *8 no longer works.         The only 
CLI feedback I get is "== Using SIP RTP CoS mark 5"         
                    In features.conf, Callpickup *8 is           commented 
out, But just incase I also changed it to *7 (We           don't use that 
feature).         
                  It appears to be something completely           SIP 
based, As if the call originates from DAHDI, It works           fine..      
   
                  If anyone has any ideas, Please let me           know. 
Thanks!         
                  SIP Trace Below         

<--- SIP read               from UDP:208.65.55.170:5063 --->            
INVITE               sip:*[email protected]:5060 SIP/2.0            
Via: SIP/2.0/UDP               172.16.10.101:5063;branch=z9hG4bK908225576   
         
From: "nicktest"               <sip:[email protected]>;tag=1470823868     
       
To:               <sip:*[email protected]>            
Call-ID:               [email protected]            
CSeq: 1 INVITE            
Contact:               <sip:[email protected]:5063>            
Content-Type:               application/sdp            
Allow: INVITE, INFO,               PRACK, ACK, BYE, CANCEL, OPTIONS, 
NOTIFY, REGISTER,               SUBSCRIBE, REFER, PUBLISH, UPDATE, MESSAGE  
          
Max-Forwards: 70            
User-Agent: Yealink               SIP-T46G 28.71.0.180            
Supported: replaces            
Allow-Events:               talk,hold,conference,refer,check-sync           
 
Content-Length: 308            

v=0            
o=- 20402 20402 IN               IP4 172.16.10.101            
s=SDP data            
c=IN IP4               172.16.10.101            
t=0 0            
m=audio 11792               RTP/AVP 0 8 18 9 101            
a=rtpmap:0 PCMU/8000            
a=rtpmap:8 PCMA/8000            
a=rtpmap:18               G729/8000            
a=fmtp:18 annexb=no            
a=rtpmap:9 G722/8000            
a=fmtp:101 0-15            
a=rtpmap:101               telephone-event/8000            
a=ptime:20            
a=sendrecv            

<------------->            
--- (14 headers 15               lines) ---            
  == Using SIP RTP               CoS mark 5            
Using INVITE request               as basis request - 
[email protected]            
Found peer               'nicktest' for 'nicktest' from 208.65.55.170:5063  
          
Found RTP audio               format 0            
Found RTP audio               format 8            
Found RTP audio               format 18            
Found RTP audio               format 9            
Found RTP audio               format 101            
Found audio               description format PCMU for ID 0            
Found audio               description format PCMA for ID 8            
Found audio               description format G729 for ID 18            
Found audio               description format G722 for ID 9            
Found audio               description format telephone-event for ID 101     
       
Capabilities: us -               0x4 (ulaw), peer - audio=0x110c            
   (ulaw|alaw|g729|g722)/video=0x0 (nothing)/text=0x0               
(nothing), combined - 0x4 (ulaw)            
Non-codec               capabilities (dtmf): us - 0x1 (telephone-event), 
peer -               0x1 (telephone-event), combined - 0x1 
(telephone-event)            
Peer audio RTP is at               port 172.16.10.101:11792            
Looking for *8 in               trunk_office (domain 10.65.6.10)            

list_route: hop:               <sip:[email protected]:5063>            


<--- Transmitting               (NAT) to 208.65.55.170:5063 --->            

SIP/2.0 100 Trying            
Via: SIP/2.0/UDP               
172.16.10.101:5063;branch=z9hG4bK908225576;received=208.65.55.170           
 
From: "nicktest"               <sip:[email protected]>;tag=1470823868     
       
To:               <sip:*[email protected]>            
Call-ID:               [email protected]            
CSeq: 1 INVITE            
Server: Asterisk PBX               1.6.2.20            
Allow: INVITE, ACK,               CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, 
NOTIFY, INFO            
Supported: replaces,               timer            
Contact:               <sip:*[email protected]>            
Content-Length: 0            

<------------>            
Scheduling               destruction of SIP dialog 
'[email protected]' in               6400 ms (Method: INVITE)         
   

<--- Reliably               Transmitting (NAT) to 208.65.55.170:5063 --->   
         
SIP/2.0 403               Forbidden            
Via: SIP/2.0/UDP               
172.16.10.101:5063;branch=z9hG4bK908225576;received=208.65.55.170           
 
From: "nicktest"               <sip:[email protected]>;tag=1470823868     
       
To:               <sip:*[email protected]>;tag=as65ceb9be            
Call-ID:               [email protected]            
CSeq: 1 INVITE            
Server: Asterisk PBX               1.6.2.20            
Allow: INVITE, ACK,               CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, 
NOTIFY, INFO            
Supported: replaces,               timer            
Content-Length: 0            

<------------>            

<--- SIP read               from UDP:208.65.55.170:5063 --->            
ACK               sip:*[email protected]:5060 SIP/2.0            
Via: SIP/2.0/UDP               172.16.10.101:5063;branch=z9hG4bK908225576   
         
From: "nicktest"               <sip:[email protected]>;tag=1470823868     
       
To:               <sip:*[email protected]>;tag=as65ceb9be            
Call-ID:               [email protected]            
CSeq: 1 ACK            
Content-Length: 0            

<------------->            
           Nick Olsen
             Network Operations             
(855) FLSPEED  x106

--  Technical Support http://www.cellroute.net

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to