Hi folks, OK... I've successfully managed to get a DTA-310 from 8x8 to take inbound calls from the PSTN, into an AS5300, through asterisk. I can call the number associated from out there in the world, it rings, & I can speak to the person on the other end just fine. However, I cannot seem to figure out how to place a call outbound through it. I do have outbound calling working fine with another SIP client, X-lite, so I'm pretty sure it's not my * setup -- I'm willing to share configs, though, if anyone thinks that'd help. This DTA-310 runs firmware version "DTA version 1.0 US (8x8 001111)" as shown on the web interface homepage, which is the only version of the firmware (that I'm aware of) that allows tinkering with the SIP settings.
I _think_ my problem has to do with the "Dial Plan" settings on the SIP configuration page. Anyone familiar with these things? By default, the dial plan setting reads: "1xxxxxxxxxx|x.T". Using this, or anything else I've experimented for that matter, I pick up the handset, dial some numbers, watch the asterisk console, and hear/see nothing. Dead air on the handset, & no scrolling gibberish on the * console. Anyone have ideas? Thanks, Jeremy Jones _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
