When I speak of the dial plan here, I'm referring to a portion on the DTA-310 web pages, not my * dial plan. I've seen a couple posts about setups like this:
* w/tdm card <--> dta-310 <--> packet8 network <--> pstn I'm not using the packet8 service, just the gear. Like this: dta-310 <--> * <--> as5300 <--> pstn Dialing in works (i.e. pstn to dta-310), but I can't figure out the dta-310 to pstn thing. Jeremy Jones -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hermann Wecke Sent: Thursday, February 26, 2004 1:30 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] DTA-310 Outbound Dialing On Thu, 26 Feb 2004, Jeremy Jones wrote: > I _think_ my problem has to do with the "Dial Plan" settings on the SIP > configuration page. Anyone familiar with these things? By default, the > dial plan setting reads: "1xxxxxxxxxx|x.T". This is my dialplan for Packet8 / 8x8: exten => _91[2-7]XXNXXXXXX,1,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) exten => _91[2-7]XXNXXXXXX,2,Congestion Dial 9 to get "a line", only will accept calls non-toll free numbers (toll free calls are route elsewhere), dial the "trunk card" and the number, strip the initial "9". This recipe is locate under extensions.conf _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
