For my NI2 PRIs I've always used 10 digits for everything and no +1
--Don From: [email protected] [mailto:[email protected]] On Behalf Of Jeff LaCoursiere Sent: Wednesday, August 20, 2014 9:41 AM To: [email protected] Subject: Re: [asterisk-users] PRI timing settings On 08/20/2014 07:58 AM, Scott L. Lykens wrote: On Aug 19, 2014, at 5:56 PM, Jeff LaCoursiere <[email protected]> wrote: I wrote earlier today about a new PRI installation in the Caribbean, where all outbound calls are functioning fine *except* calls to Sprint phone numbers, which get rejected immediately as "busy". I don't know what expectations for CLID your carrier might have, or for that matter the upstream carrier, however, we found through our CLEC here in the US that while the CLEC was happy to take e.164 formatted numbers from us as CLID, Global Crossing would reject them further upstream resulting in our calls to many toll frees being rejected. Switching to 10 digit CLID on all outbound calls through that PRI solved the problem. I don't know if this is your problem but be sure your CLID is in the most simple format possible for your region to help rule it out. sl This makes me curious... what *is* the simplest format possible for NANPA numbers? I'm sure there must be a spec to conform to. Can anyone point me to it? Cheers, j
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
