2014-11-17 12:55 GMT+01:00 Larry Moore <[email protected]>: > > > On 17/11/2014 7:34 PM, Larry Moore wrote: >> >> >> >> On 17/11/2014 6:42 PM, Olivier wrote: >>> >>> Hello, >>> >>> If I'm not mistaken, it is not possible to get T.38 on a SPA3102 FXO >>> port (it is possible with the FXS port). >>> Do you know, by experience preferably, if this is possible with an >>> SPA8800 FXO port ? >>> >> >> > > Reading your question again, no the FXO port will not perform T.38, you are > limited to G711 pass-through, from memory my SPA8800 was on the LAN the > Asterisk PBX was attached and faxes were pretty good though I would have > preferred to see T.38.
Thanks for sharing this here: while it's not always easy to discover what a product can do, it's harder to know what it CANNOT do. Thanks > > Grandstream ATA's support T.38 on the FXO port. I had a lot of trouble to localize SPA3102 settings for Caller ID presentation, for instance. How does Grandstream localization works ? Do you also have hundreds of parameters for this or do you simply select a Country within a pre-configured list (like Patton smartnodes) ? > > > Larry. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
