On Mon, Dec 15, 2014 at 9:48 PM, Dan Cropp <d...@amtelco.com> wrote: > > Thanks George. > > I will correct my local_net in the morning. > > Vitelity chan_sip settings I have working, do not have a fromuser. > sip.conf settings... > > I think you can actually specify anything, it just has to be populated with something other than a sub-account username.
> [HVout] > > type=friend > > dtmfmode=auto > > host=64.2.142.93 > > disallow=all > > allow=ulaw > > canreinvite=no > > trustrpid=yes > > sendrpid=yes > > nat=yes > > context=TestApp > > > > On Dec 15, 2014, at 9:32 PM, George Joseph <george.jos...@fairview5.com> > wrote: > > > > On Mon, Dec 15, 2014 at 7:34 PM, Dan Cropp <d...@amtelco.com> wrote: >> >> I am not sure if I entered the correct settings for the transport >> information. >> >> For the local_net, I entered my local ip address, but no mask. I will >> check with the network admin so he can verify the settings I entered. >> >> >> > You need the network and mask. For example if the ip address and mask of > the test machine is 192.168.0.1/255.255.255.0 then the correct entry > would be 192.168.0.0/24. > > >> One minor detail, we are using ip authentication. When Vitelity changed >> my account from user based authentication to IP based authentication, they >> stopped including a user for the account. >> >> >> >> Should these settings work without the from_user (IP based >> authentication) or do I need to get the account name from Vitelity? >> >> > You definitely need the master account login username. If you has this > working with chan_sip, then try the 'fromuser' from sip.conf and user is > from_user. > > > > >> >> >> Have a great day! >> >> >> >> Da >> >> >> >> *From:* asterisk-users-boun...@lists.digium.com [mailto: >> asterisk-users-boun...@lists.digium.com] *On Behalf Of *George Joseph >> *Sent:* Monday, December 15, 2014 7:27 PM >> *To:* Asterisk Users Mailing List - Non-Commercial Discussion >> *Subject:* Re: [asterisk-users] PJSIP configuration question >> >> >> >> Ok Dan, try this... I was able to get this to work behind a NAT and with >> ip address authentication. >> >> [global] >> type = global >> debug = yes >> >> [transport1] >> type = transport >> bind = 0.0.0.0 >> protocol = udp >> >> >> >> *local_net=<yourlocalnet I.E. 10.10.10.10/24 >> <http://10.10.10.10/24>>external_media_address=<your public ip >> address>external_signaling_address=<your public address>* >> [outbound.vitelity.net] >> type = aor >> remove_existing = yes >> qualify_frequency = 60 >> contact = sip:64.2.142.93 >> >> [outbound.vitelity.net] >> type = endpoint >> context = TestApp >> transport = transport1 >> aors = outbound.vitelity.net >> dtmf_mode = rfc4733 >> force_rport = yes >> rtp_symmetric = yes >> rewrite_contact = yes >> send_rpid = yes >> trust_id_inbound = yes >> disallow = all >> allow = ulaw >> direct_media = no >> >> *from_user=<your main vitelity account name> ; Not subaccount* >> >> [outbound.vitelity.net] >> type = identify >> endpoint = outbound.vitelity.net >> match = 64.2.142.93 >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users