Hello, Anyone to help me with this issue? It has never worked :(
On Wed, May 20, 2015 at 11:34 AM, Tony Kasule <[email protected]> wrote: > Hello users, > > I have a Digium Te235 and asterisk 13 which have worked well with 1 > carrier but we have failed to add a 2nd carrier. The second telco brings > their E1 line over finer, terminated in a RAD modem and they give me > ethernet to the E1 card. It's the first time i am having install such a > solution, which ideally would be not a big problem. > > However, The physical layer has failed to come up! I have tried the same > setup in an Alcatel OmniOCX and it works well. I can confirm that the port > is also well configured because when I interchange the cables (with the > exiting cable from the other telco), the alarm clears emmediately for the > 1st telco and becomes RED for the 2nd telco. A loop also clears the alarm > on both ports. > > The telco has told me to make sure that Line Impedance is 120 ohms but > There's no where to set that and when I was reading, I was told that E1 is > already 120 ohms so no need to change anything. > > Has anyone here experienced this? What other things can I try? > > Thank you! > > Regards, > Tim >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
