Dear David, I am sorry, I can give the answer right now as the box is at a remote location where I don't have access right now. However, I think the card is ok and al the spans are working. Yesterday I had asked the telco to bring a new RAD modem and I also took there another dell optiplex 3010 desktop with another TE235 card in it but same results! I can confirm that the cards are ok!
On Tue, Jun 30, 2015 at 12:36 PM, David Duffett <[email protected]> wrote: > What response do you get to *CLI> pri show spans ? > > On 30 June 2015 at 09:34, Tony Kasule <[email protected]> wrote: > >> Hello, >> >> Anyone to help me with this issue? It has never worked :( >> >> On Wed, May 20, 2015 at 11:34 AM, Tony Kasule <[email protected]> >> wrote: >> >>> Hello users, >>> >>> I have a Digium Te235 and asterisk 13 which have worked well with 1 >>> carrier but we have failed to add a 2nd carrier. The second telco brings >>> their E1 line over finer, terminated in a RAD modem and they give me >>> ethernet to the E1 card. It's the first time i am having install such a >>> solution, which ideally would be not a big problem. >>> >>> However, The physical layer has failed to come up! I have tried the >>> same setup in an Alcatel OmniOCX and it works well. I can confirm that the >>> port is also well configured because when I interchange the cables (with >>> the exiting cable from the other telco), the alarm clears emmediately for >>> the 1st telco and becomes RED for the 2nd telco. A loop also clears the >>> alarm on both ports. >>> >>> The telco has told me to make sure that Line Impedance is 120 ohms but >>> There's no where to set that and when I was reading, I was told that E1 is >>> already 120 ohms so no need to change anything. >>> >>> Has anyone here experienced this? What other things can I try? >>> >>> Thank you! >>> >>> Regards, >>> Tim >>> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > > -- > [image: Digium logo] > *David Duffett* > Digium, Inc. · Director, Worldwide Asterisk Community > 6 Landscape Close · Weston on the Green · Bicester · Oxfordshire OX25 3SX > · UK > direct/fax: +1 256 428 6119 · mobile: +44 7722 442236 > twitter: dduffett · linkedin: www.linkedin.com/in/davidduffett > Check us out at: http://digium.com · http://asterisk.org > <http://www.asterisk.org/> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
