> The software configuration depends (of course) on your hardware > configuration. In this situation, what kind of hardware do you plan to > use to connect your asstricks box to KPN? <opinion>You are best of going > with a capi capable isdn card, and using chan_capi (see > http://www.junghanns.net/asterisk/page1.html)</opionion>, your > alternative would be to use chan_modem together with isdn4linux. > I've done both, so my <opinion /> is based on personal experience.
I have 2 Eicon Diva cards which I am using chan_capi. I have chan_capi installed and configured and it detects the ports ok. I have the lines plugged in but when I dial the number associated with the line does not get picked up and I get a non-existant number tone. When I plug in a standard isdn telephone into the line it all works ok. I think I am using the wrong kind of signalling. I have found out that kpn use e164 as the signalling but I cannot find anywhere to configure this. Thanks for any advice you can give. Regards Mark _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
