On Wed, 2004-03-03 at 16:12, Mark wrote: > > The software configuration depends (of course) on your hardware
> I have 2 Eicon Diva cards which I am using chan_capi. > I have chan_capi installed and configured and it detects the ports ok. > > I have the lines plugged in but when I dial the number associated with the > line does not get picked up and I get a non-existant number tone. When I plug > in a standard isdn telephone into the line it all works ok. This is where you would tell us what is in your /etc/asterisk/capi.conf, and what is in your extensions.conf hint: ------capi.conf------------ ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] amaflags => billing group => 1 msn=101234567 incomingmsn=101234567 controller=1 softdtmf=0 context=inbound-pstn ;prefix=0 ;echocancel=yes ;echotail=64 devices=2 msn=107654321 incomingmsn=107654321 controller=1 softdtmf=0 context=inbound-pstn devices=2 ----------------------------------------- > I think I am using the wrong kind of signalling. I have found out that kpn use > e164 as the signalling but I cannot find anywhere to configure this. Well, I'm using capi on KPN lines since ages, and have never knowingly configured any kind of signalling, so I doubt that that's the right path to search. > > Thanks for any advice you can give. > > Regards > > Mark > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Envida http://www.envida.net/ Armand A. Verstappen Vleutenseweg 86 [EMAIL PROTECTED] 3532 HM Utrecht tel: +31 (0)30 299 2109 The Netherlands fax: +31 (0)30 299 2108 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
