Is anyone using a 3com 3CNJPSE to power a 7960G? I have a couple of 7960Gs and 3CNJPSEs but no combination appears to work. Both phones work fine with a cisco power cube. I get a 47.6V reading across pins 5 and 8 on the patch cable coming from the 3CNJPSE. The network still works through the 3CNJPSE, just no power to the phone until I connect the power cube. Using two straight through wired patch cables, 7960G running sip firmware version 6.3. I've tried different patch cables with the same result. Note this is a G version of the phone which I understand is enable to work with 802.3af devices natively and hence I believe doesn't require a specially wired patch cable. I've looked for a setting to tell the phone to get power via the network without success, is there one? Any ideas?
TIA _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
