>>> >>> Essentially these are general issues I have with Sipura SPA 2000: >>> >>> >>> * If SPA 2000 is behind NAT, calls are not hanged up when >>> receiver is replaced. I think asterisk does not get hung-up >>> signal from SPA so called party user agent is ringing until >>> timeout expires or else!. This is even worse when call is >>> actually answered because caller is charged for usage >>> regardless. I have the other day spent �13 on a 30 seconds >>> call... ;) >>> >> We have not experienced this issue from any of our customers that >> use the SPA. >> > Wait! I take this back. We did experience this issue with 1.0.24 > but we quickly upgraded from it.
Strange... I still have this problem even after firmware upgrade to .31 > >>> * I can not update device to latest .31 firmware. It just sits >>> there waiting for SPA 2000 to "not to be in use". I waited and >>> waited for many many minutes... >>> I did upgrade firmware ... The reason I was not able to upgrade it with upgrade program is because I had "Upgrade Enable" set to NO. ;) >> >>> * SPA 2000 does not keep NAT port opened... so I have got it to >>> work only by re-registering it every 180 seconds. I am hoping >>> this issue is fixed in the latest firmware.. (which I can not >>> apply :) ).. >>> >> We have many Sipura units behind various NATs. All of them keep the >> NAT port opened. Why don't you capture the traffic coming from the >> SPA to see if is is not sending the keep-alive. If it is not then >> you have a problem with your config. We have used all firmware >> versions since 1.0.15 and all send the keep-alive just fine. Above seems to work ok now... PORTS are kept alive... _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
