That's right, you can still select a different ring tone for ALL lines. Ok.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Christopher Lee > Sent: Saturday, March 20, 2004 9:04 PM > To: Asterisk Users > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > The custom ring tones are selectable through the Ring Type > option in the Settings menu. When the phone rings, it will > play that custom ring tone. > > Perhaps it's a memory limitation or an issue with the way > Cisco are implementing the SIP firmware as to why you can't > select a custom ring tone, you'd be better asking a Cisco > engineer (open a TAC case) > > The phone will only download the currently selected custom > ring tone (defined in RINGLIST.DAT) from the TFTP server each > time it boots, or when you select another custom ring tone > from the Ring Type option. > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of Matthew Marlowe > > Sent: Sunday, 21 March 2004 11:53 AM > > To: Asterisk Users > > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > > > Then what's the point of being able to upload custom ring tones? > > > > (as shown in > > http://www.loligo.com/asterisk/Cisco/79xx/current/RINGLIST.DAT ) > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > Christopher Lee > > > Sent: Saturday, March 20, 2004 8:50 PM > > > To: Asterisk Users > > > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > > > > > Unfortunately even though it would seem the phone should > support the > > > ability to play custom ring tones, at present it only > supports the > > > internal tones which are:- > > > > > > Bellcore-BusyVerify > > > Bellcore-Stutter > > > Bellcore-MsgWaiting > > > Bellcore-dr1 > > > Bellcore-dr2 > > > Bellcore-dr3 > > > Bellcore-dr4 > > > Bellcore-dr5 > > > > > > --- Extract from the SIP 6.0 Firmware Release Notes --- > > > http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon > > > /english/ipp79 > > > 60/addprot/sip/relnote/phnrn60s.htm > > > > > > In RFC-3261, the Alert-Info header is specified as a URL. > > > When the Alert-Info header is received, the phone > downloads the file > > > from the URL and plays it as the alternate ring tone. > This release > > > does not support any external ringers. > > > Only the tones and ring patterns that are already internal to the > > > phone can be selected and played as an alternate ring tone. > > > > > > In this release, the Alert-Info header consists of a name of an > > > internal tone or ringing pattern that can be played, as > shown in the > > > following > > > example: > > > > > > Alert-Info: <Bellcore-Busy> > > > > > > There is no need to add a file extension (.au, .wav) to > these names > > > because the names are internal to the phone. When an Alert-Info > > > header is received, the software scans the list of known > tones and > > > ringing patterns to find a match. If the software finds a > match, the > > > phone plays that tone or ringing pattern. If the software > does not > > > find a match, the phone plays the alert ringing pattern > as it does > > > today. > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:asterisk-users- [EMAIL PROTECTED] On > Behalf Of Rich > > > > Adamson > > > > Sent: Sunday, 21 March 2004 9:28 AM > > > > To: Asterisk-a-users-list > > > > Subject: [Asterisk-Users] Use of Alert_Info with C7960? > > > > > > > > Using Asterisk CVS-03/20/04-11:54:56 with 7960 v6.2 and > > > playing around > > > > with distinctive ringing, trying to make it work. > Extensions.conf > > > > looks > > > > like: > > > > > > > > exten => 3010,1,SetVar(ALERT_INFO=3) ; selects Ringer exten => > > > > 3010,2,Dial(SIP/3010,15) exten => > 3010,3,Voicemail2(u3010) exten > > > > => > > > > 3010,102,Voicemail2(b3010) exten => 3010,103,Hangup > > > > > > > > Calling that extension, the CLI indicates: > > > > -- Executing SetVar("SIP/3002-39d1", "ALERT_INFO=3") in > > > new stack > > > > -- Executing Dial("SIP/3002-39d1", "SIP/3010|15") > in new stack > > > > -- Called 3010 > > > > -- SIP/3010-f848 is ringing > > > > > > > > On the phone, Settings/Ring Type indicates: Chirp 1, > Chirp 2, Old > > > > Style and Synth Low. The first three choices produce > > > different ringing > > > > sounds when selected from the display. > > > > > > > > I expected Alert_Info=3 to cause the C7960 to ring with the > > > Old Style > > > > ringer, but it doesn't and setting it to 2 or 3 doesn't > make any > > > > difference. > > > > > > > > Am I doing something wrong? > > > > > > > > Rich > > > > > > > > > > > > _______________________________________________ > > > > Asterisk-Users mailing list > > > > [EMAIL PROTECTED] > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
