Yes, I know it will definitely play custom ringtones, I was even using the 24ctu.raw ring tone for a while (I've gone back to Chirp 1 for now). But all incoming calls get the currently selected ring tone.
I should have clarified on an earlier statement I made:- "Perhaps it's a memory limitation or an issue with the way Cisco are implementing the SIP firmware as to why you can't select a custom ring tone, you'd be better asking a Cisco engineer (open a TAC case)" This was in reference to playing a custom ring tone with Alert_Info (ie: Distinctive Ring). If you know how to make the 7960 play a different ring tone by setting the Alert_Info variable, please tell! > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Paul Mahler > Sent: Sunday, 21 March 2004 1:17 PM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > The 7960 will absolutely play custom ringtones. > > > > Paul Mahler > [EMAIL PROTECTED] > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Christopher > Lee > Sent: Saturday, March 20, 2004 5:50 PM > To: [EMAIL PROTECTED] > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > Unfortunately even though it would seem the phone should support the > ability > to play custom ring tones, at present it only supports the internal tones > which are:- > > Bellcore-BusyVerify > Bellcore-Stutter > Bellcore-MsgWaiting > Bellcore-dr1 > Bellcore-dr2 > Bellcore-dr3 > Bellcore-dr4 > Bellcore-dr5 > > --- Extract from the SIP 6.0 Firmware Release Notes --- > http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp > 79 > 60/addprot/sip/relnote/phnrn60s.htm > > In RFC-3261, the Alert-Info header is specified as a URL. When the > Alert-Info header is received, the phone downloads the file from the URL > and > plays it as the alternate ring tone. This release does not support any > external ringers. Only the tones and ring patterns that are already > internal > to the phone can be selected and played as an alternate ring tone. > > In this release, the Alert-Info header consists of a name of an internal > tone or ringing pattern that can be played, as shown in the following > example: > > Alert-Info: <Bellcore-Busy> > > There is no need to add a file extension (.au, .wav) to these names > because > the names are internal to the phone. When an Alert-Info header is > received, > the software scans the list of known tones and ringing patterns to find a > match. If the software finds a match, the phone plays that tone or ringing > pattern. If the software does not find a match, the phone plays the alert > ringing pattern as it does today. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
