On Mon, 22 Mar 2004 06:31:00 -0800 (PST), suresh kumar <[EMAIL PROTECTED]> wrote:
>Hi, > PLEASE STOP YELLING >INSTALLED ASTERISK PROPERLY AND WORKS FINE. AFTER I >MADE A WRONG DECISION TO INSTALL iaxComm in the >Client, it's created problem. When i type asterisk -r >command, Now i got display as >[EMAIL PROTECTED] asterisk]# asterisk -r >Asterisk CVS-03/18/04-18:01:45, Copyright (C) >1999-2004 Digium. >Written by Mark Spencer <[EMAIL PROTECTED]> >========================================================================= >Connected to Asterisk CVS-03/18/04-18:01:45 currently >running on edventure17 (pid = 4462) >edventure17*CLI> ^^^^^^^^^^^^^^^^ *is* the command prompt >WHY I AM NOT GETTING *CLI prompt? "edventure12" i gave >when registering the iaxComm. How can i get back *CLI >prompt? You *do* have a command prompt. "Installing" iaxComm did not break anything. When you untar the tar file, you get an executable, two text files called QUICKSTART and README and a 16 bit pcm file called ringtone.raw. No shared libraries. No changes to any .conf files When run, iaxComm creates a lockfile ~/iaxComm.lock to prevent two instances from running at the same time. It also creates a config file of its own, ~/.iaxComm. Neither of these files will conflict with asxterisk in any way. > > > >I am using an on board sound card. HOW CAN I CHECK >WHETHER IT'S CONFIGURED OR NOT? > > > >I'm also assuming that you still have the default >extensions.conf. If >so, you should be able to type dial 600 > > > >YES ... I didn't change the default extensions.conf. >If i type dial 600 in edventure17*CLI prompt, getting >display as " No such command 'dial' (type 'help' for >help)". I think this is a result of asterisk not recognizing your sound card >So i type "reload" in edventure17*CLI prompt and enter >the key. Then i type dial 600 , i got edventure17*CLI >prompt. >Is there anything wrong with my configuration? >If it's wrong, How to fix that? > > >Now what can i do to get back to the asterisk solution >part. I am not able to continue ... >PLease advice me what can i do in this stage. > >Thanks & Regards, >Suresh > > >wrote: ><snip> >>I would like to get some help from you. >>My server ip is 192.168.1.1 and i would like to >>connect to another ip 192.168.1.2. So how can i >>specify the ip 192.168.1.2 so that make a call from >>192.168.1.1? > > > >>Basic configuration is described in the QUICKSTART >>that came with the binary. >>But, since you want to originate calls from the >>asterisk server, that's a bit different. > > > >>I'm assuming that you have asterisk installed and >>working with your sound card. > > > >>I'm also assuming that you still have the default >>extensions.conf. If so, you should be able to type >>dial 600 > > > >YES ... I didn't change the default extensions.conf. >If i type dial 600 in edventure17*CLI prompt, getting >display as " No such command 'dial' (type 'help' for >help)". >So i type "reload" in edventure17*CLI prompt and enter >the key. Then i type dial 600 , i got edventure17*CLI >prompt. >If it's wrong, How to fix that? > > > >>at the CLI prompt and get the echo test. If not, >>you'll have to get that fixed before going further. > > > >>If you can dial extensions from the console OK, then >>just > > > >>1. Make and iax.conf entry for an extension > > > >>[101] >>type=friend >>host=dynamic >>secret=foo >>context=default >>callerid="Remote PC" <101> >>diasallow=all >>allow=gsm > > > >>2. Make an extensions.conf entry for that extension >>in the default context > > > >>exten => 101,1,Dial(IAX2/101) > > > >>3. Configure iaxComm on the other machine to use the >>iaxconf entry (username 101, password foo) > > > >>as described in the QUICKSTART. > > > >> >>Should i install softphone s/w in server >(192.168.1.1) >>and other machine (192.168.1.2)? > > > > >__________________________________ >Do you Yahoo!? >Yahoo! Finance Tax Center - File online. File on time. >http://taxes.yahoo.com/filing.html >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
