On Wednesday 24 March 2004 16:40, Steve Murphy wrote: > I have been experiencing the same problem with my 4-port Digium FXS > card. I see Ouch, reset... messages on the console. One of the > lines, maybe 2, will either lose dial tone completely, or have tons > of static on the line. On the latest event, today, I noted that > even when the dialtone was gone, asterisk could still detect that I > took the phone off-hook. > > To clear it up, either reboot, or, I find that bringing down > asterisk, then rmmod the wcfxs, and then modprobing it back, and > ztcfg, and restart asterisk, usually brings the lines back to life. > Frequency: maybe 1 or 2 times per week at the worst, once every > other week at the best. > > I have the newest 4 port card. Yes, it is plugged into the power > supply. Yes, the TDM has IRQ #4, all to itself. > > What is going on? Is there any hardware config that NEVER has any > problem?
Try replacing the power supply or adding a UPS to your configuration. The problem is that the power is occasionally dropping to a point where the TDM board attempts a reset. These power dips can sometimes leave the hardware in a strange state. -Tilghman _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
