[Asterisk-Users] 'Busy tone' after hangup

[Ryan Courtnage]

Hello,

I find that when 2 extensions are connected, and one of the extensions 
hangs up on the call, the other will receive a busy signal (as if to 
indicate that the call is over).

Does this sound like a config problem, or is it the default behavior of 
*?

Example:

[ext-testing]
exten => 111,1,Dial(SIP/2001)
exten => 111,2,Hangup
exten => h,1,Hangup
Zap/2 dials 111:
    -- Starting simple switch on 'Zap/2-1'
    -- Executing Dial("Zap/2-1", "SIP/2001") in new stack
    -- Called 2001
    -- SIP/2001-b164 is ringing
    -- SIP/2001-b164 answered Zap/2-1
After SIP/2001 hangs up:
    -- Executing Hangup("Zap/2-1", "") in new stack
    -- Hungup 'Zap/2-1'
... followed by Zap/2 getting a "beep-beep-beep-..." 'busy tone'.

If this is the default behavior, can it be changed?  After the remote 
end hangs-up on a call, I'd expect to hear either dialtone or silence.

Thanks
Ryan
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users