Has anybody got any experience using an X100P on an NTL phone line in the UK (I'm in an ex Cable & Wireless area if that makes any difference).
The problem I'm having (and judging by the number of references to it I've found searching it is a common one) is getting * to detect when the line has been hung up. It doesn't matter if it comes through to a person directly as they can just hang that phone up, but when it hits voicemail, and it sits there for two minutes recording an empty message, and then emails it to the person it can be a bit annoying!
There are a couple of possible things that I realize could be causing it, the most major being that the phone wiring to the port that asterisk is plugged into is a bit dodgy and I think there is a fair amount of interference which I suspect could be annoying it a bit.
The other possible problem is that when someone hangs up, the tone that comes down the phone line to indicate that it has been hung up lasts for about 4 seconds, and then the line just goes silent - would this mean that the busy detect mechanism would not detect that it has been hung up?
Thanks in advance, Alex Brett [EMAIL PROTECTED] +44 (0)870 744 2170 http://www.loho.co.uk/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
