On Tue, 2004-04-13 at 02:19, Alex Brett wrote: > Has anybody got any experience using an X100P on an NTL phone line in > the UK (I'm in an ex Cable & Wireless area if that makes any difference). > > The problem I'm having (and judging by the number of references to it > I've found searching it is a common one) is getting * to detect when the > line has been hung up. It doesn't matter if it comes through to a > person directly as they can just hang that phone up, but when it hits > voicemail, and it sits there for two minutes recording an empty message, > and then emails it to the person it can be a bit annoying!
I can't comment as to whether this will work in the UK as the last phone I had in the UK was Birmingham Cable around 12 years ago. But that said we seem to have similar problems here in France, I seem to have overcome it, someone else has used my settings and his seems to work and another is going to configure his tonight. So these are our settings:- In * Makefile . # Original busydetect routine BUSYDETECT = #-DBUSYDETECT # Improved busydetect routine, comment the previous one if you use this one BUSYDETECT+= -DBUSYDETECT_MARTIN # Detect the busy signal looking only at tone lengths # For example if you have 3 beeps 100ms tone, 100ms silence separated by 500 ms of silence BUSYDETECT+= #-DBUSYDETECT_TONEONLY # Inforce the detection of busy singal (get rid of false hangups) # Don't use together with -DBUSYDETECT_TONEONLY BUSYDETECT+= -DBUSYDETECT_COMPARE_TONE_AND_SILENCE In zapata.conf busydetect=yes busycount=7 In voicemail.conf maxmessage=180 minmessage=3 maxsilence=10 silencethreshold=128 In indications.conf I have only the details of France I've removed everything else. YMMV -- Dave Cotton <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
