What kind of prepaid agi did you use ?
Could you send me the page ? How install or where find ?
Thanks alot.
On Mon, 19 Apr 2004 20:07:14 -0600, Julio wrote:
> My Asterisk prepaid debug is:
>
>
> - Hungup 'Zap/2-1'
> Urgent handler
> -- Starting simple switch on 'Zap/2-1'
> Urgent handler
> -- Playing 'prepaid-enter-card-num' (language 'en')
> Urgent handler
> -- Playing 'prepaid-you-have' (language 'en')
> Urgent handler
> -- Playing 'digits/4' (language 'en')
> Urgent handler
> -- Playing 'digits/hundred' (language 'en')
> Urgent handler
> -- Playing 'prepaid-dollars' (language 'en')
> Urgent handler
> -- Playing 'prepaid-enter-dest' (language 'en')
> Urgent handler
> -- Playing 'prepaid-dest-blocked' (language 'en')
> Urgent handler
> -- Playing 'prepaid-dest-unreachable' (language 'en')
>
>
> Why 'prepaid-dest-unreachable' ??????
>
> Thks.
>
> Regards
>
>
> ----- Original Message -----
> From: Martin Christian Koch
> To: [EMAIL PROTECTED]
> Sent: Monday, April 19, 2004 4:05 PM
> Subject: [Asterisk-Users] spandsp/rxfax terminates asterisk
>
>
> Initial handshake sounds fine, but asterisks dies before receive
> of the fax. Here is the log : Changed from phase 0 to 1 Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down Slow
> carrier up Slow carrier down Slow carrier up Slow carrier down
> Start receiving document Changed from phase 1 to 4 Sending ident
>
>>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>>>> 20 20 20
> DIS:
> Preferred octets: 256
> Can receive fax
> Supported data signalling rates: V.27ter and V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Minimum scan line time for higher resolutions: T15.4 = T7.7
>>>> DIS: 80 00 ce f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> T4 timeout in state 9
> Changed from phase 3 to 4
> Sending ident
>>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>>>> 20 20 20
> DIS:
> Preferred octets: 256
> Can receive fax
> Supported data signalling rates: V.27ter and V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Minimum scan line time for higher resolutions: T15.4 = T7.7
>>>> DIS: 80 00 ce f0 80 80 01
> T2 timeout
> Start receiving document
> Sending ident
>>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>>>> 20 20 20
> DIS:
> Preferred octets: 256
> Can receive fax
> Supported data signalling rates: V.27ter and V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Minimum scan line time for higher resolutions: T15.4 = T7.7
>>>> DIS: 80 00 ce f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> Slow carrier up
> <<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20 20 20 20 20
> 20 20
> TSI without final frame tag
> Remote fax gave TSI as: "+45 56167760"
> <<< DCS: 83 00 46 20
> DCS with final frame tag
> In state 9
> DCS:
> Can receive fax
> Selected data signalling rate: V.29, 9600bps
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Minimum scan line time: 10ms
> Get at 9600
> Changed from phase 3 to 5
> Fast carrier up
> Fast carrier down
> Fast carrier up
> Coarse carrier frequency 1700.00 (64)
> Training error 29.095569
> Training succeeded (constellation mismatch 25.504344)
> Fast carrier trained
> Fast carrier down
> Changed from phase 5 to 4
> Start rx document - compression 1
> Start rx page
> asterisk in realloc(): warning: junk pointer, too high to make
> sense
> Oh dear!
>>>> CFR: 84
> HDLC underflow in state 5
> Post trainability
> Changed from phase 4 to 5
> Fast carrier up
> Coarse carrier frequency 1700.04 (64)
> Training error 26.487284
> Training succeeded (constellation mismatch 27.123313)
> Fast carrier trained
> Segmentation fault (core dumped)
>
> Anyone ?
>
> Thanks,
> Martin
>
>
> Min mail er beskyttet af SPAMfighter
> 3174 spam mails er blokeret indtil videre.
> Hent gratis SPAMfighter i dag!
