Hi I know there is no support for R2, but I succcessfully compiled and ran the libr2. However, I am not able to initiate calls.
The error I get is
Couldn't call g3/71605538
-- Hungup 'Zap/32-1'
== Everyone is busy at this time
I understand that the idle signaling is not working right, any ideas on
what I can do to fix this problem?
Looking forward to your responses.
Regards,
Jorge
On Fri, 2004-04-30 at 22:58, Steve Underwood wrote:
> jorge verastegui wrote:
>
> >Hi
> >
> >i have successfully downloaded and compiled libr2 from source.
> >
> >But i dont seem to find how to properly configure it. When i run it
> >(partcially unconfigured) the following error occurrs
> >
> >Signalling requested is R2 Signalling but line is in PRI Signalling
> >signalling
> >
> >
> This error is easy to fix by changing ccs to cas, and removing crc4, in
> your zaptel.conf file. However libr2 does not work. It is a partly
> implemented solution which I abandoned. It only gets you about 10% of
> the way to a working R2 system :-(
>
> My current R2 software is completely different.
>
> Regards,
> Steve
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Jorge Verastegui <[EMAIL PROTECTED]>
RedCetus S.R.L.
------------------------------------------------------------------NOTA DE REDCETUS S.R.L. : La información contenida en este E-mail y sus anexos, sólo puede ser utilizada por el individuo o la compañía a la cual está dirigido. Si no es el receptor autorizado, cualquier retención, difusión, distribución o copia de este mensaje es prohibida y sancionada por la ley. Si por error recibe este mensaje, favor reenviarlo y borrar el mismo
