Hello all, I've just finished to install chan_capi with 3 AVM Fritz PCI cards.
It correctly loads the 3 drivers, and * starts without errors. immediately after * start, audio quality is really fine, but, after the first incoming call, all incoming audio is broken, trembling and stuttering. >From the other side, audio is still fine. Basically if i receive a call, who called me hears a fine audio while i hear only stuttering noise. After the first call ends, the problem persist on each call until i restart *. If no call are received, all goes well with fine audio (i.e. without incoming calls answered, outgoing calls go just fine as expected. This is my capi.conf file (don't know if it's important in this case, but better put than not :-) ) ; ; CAPI config ; ; [general] nationalprefix=0 internationalprefix=00 rxgain=1.0 txgain=1.0 [interfaces] mode=immediate msn=0 incomingmsn=* ;isdnmode=ptmp controller=1,2,3 softdtmf=1 overlap=1 context=default echosquelch=1 echocancel=yes echotail=64 ;deflect=12345678 callgroup=1 devices=2,2,2 Any suggestion? i've done a quick search on ml archives but didn't find a similar problem... Thanks in advance -- Stefano _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
