hi, what happens if you change the rxgain and txgain to something lower than 1.0 ?
best regards Wolfgang Am Mo, den 31.05.2004 schrieb Stefano Finetti um 17:11: > Hello all, > > I've just finished to install chan_capi with 3 AVM Fritz PCI cards. > > It correctly loads the 3 drivers, and * starts without errors. > > immediately after * start, audio quality is really fine, but, after the > first incoming call, all incoming audio is broken, trembling and stuttering. > > From the other side, audio is still fine. > > Basically if i receive a call, who called me hears a fine audio while i hear > only stuttering noise. > > After the first call ends, the problem persist on each call until i restart > *. > > If no call are received, all goes well with fine audio (i.e. without > incoming calls answered, outgoing calls go just fine as expected. > > This is my capi.conf file (don't know if it's important in this case, but > better put than not :-) ) > > ; > ; CAPI config > ; > ; > [general] > nationalprefix=0 > internationalprefix=00 > rxgain=1.0 > txgain=1.0 > > [interfaces] > > mode=immediate > msn=0 > incomingmsn=* > ;isdnmode=ptmp > controller=1,2,3 > softdtmf=1 > overlap=1 > context=default > echosquelch=1 > echocancel=yes > echotail=64 > ;deflect=12345678 > callgroup=1 > devices=2,2,2 > > > Any suggestion? i've done a quick search on ml archives but didn't find a > similar problem... > > Thanks in advance > > -- > Stefano > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
