your using an analog adapter. We cover this regularly. You need
callprogress detection since you don't have a reliable way of doing it
via the analog adapter.
On Wed, 2004-06-02 at 14:09, Gelson Dias Santos wrote:
> I have some X100P connected to my analog PBX. When I want to call an
> analog extension on that PBX I use the following rule:
>
> exten => _21XX,1,Dial(Zap/g1/${EXTEN:2},20)
>
> where 21 is just a prefix to indicate it�s an analog extension and XX
> matches the real two digit extension number. (this is why I strip of two
> digits when dialing Zap/g1. Well, everything works fine, except that *
> says on the log that the call was answered, even if it�s still ringing.
> The problem is that now I want to set up voicemail to those analog
> extensions, but since * says it "answered on first ring" it never goes
> to the next priority, where voicemail is called.
> I tried callprogress=yes on zapata.conf but it has no effect. Here is a
> tipical log from a call I have _not_ answered:
>
> -- Executing Dial("SIP/2000-a638", "Zap/g1/32|20") in new stack
> -- Called g1/32
> -- Zap/1-1 answered SIP/2000-a638
>
> I�m runnign 0.9.0 from the tar archive. Is this a known bug? Is there a
> workaround for it?
>
> Gelson
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Steven Critchfield <[EMAIL PROTECTED]>
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
