Steven Critchfield wrote:
your using an analog adapter. We cover this regularly. You need
callprogress detection since you don't have a reliable way of doing it
via the analog adapter.
No, I�m not using an analog adapter. As I said, my X100P connects directly to my PBX.
Gelson
On Wed, 2004-06-02 at 14:09, Gelson Dias Santos wrote:
I have some X100P connected to my analog PBX. When I want to call an analog extension on that PBX I use the following rule:
exten => _21XX,1,Dial(Zap/g1/${EXTEN:2},20)
where 21 is just a prefix to indicate it�s an analog extension and XX matches the real two digit extension number. (this is why I strip of two digits when dialing Zap/g1. Well, everything works fine, except that * says on the log that the call was answered, even if it�s still ringing.
The problem is that now I want to set up voicemail to those analog extensions, but since * says it "answered on first ring" it never goes to the next priority, where voicemail is called.
I tried callprogress=yes on zapata.conf but it has no effect. Here is a tipical log from a call I have _not_ answered:
-- Executing Dial("SIP/2000-a638", "Zap/g1/32|20") in new stack -- Called g1/32 -- Zap/1-1 answered SIP/2000-a638
I�m runnign 0.9.0 from the tar archive. Is this a known bug? Is there a workaround for it?
Gelson _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
