If I turn allow=ulaw on only, asterisk tries to use it a=rtpmap:0 PCMU/8000
but the ATA says it doesn't have it: Answering/Requesting with root capability 4 Answering with non-codec capability 0x1(G723) If I turn allow=alaw on only or with allow=ulaw, asterisk sends it, the ATA says it has it [alaw], but it still won't negotiate it. I think the stupid ATA is just determined to use G723 no matter what... I have LBRCodec set to 3 which should have it try to use G729, but it still tries to use G723. The AudioMode setting has a parameter bit to "Enable G711 only", but I'm not sure how that bit thing works. Either the default 0x00150015 or the recommended 0x00140014 fails. [btw, bit 1 should be "1" to enable G711 only, if someone can help me there]. I'm seriously about to punt this thing into the garbage. Help! thanks, matt > From: "Timothy R. McKee" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Subject: RE: [Asterisk-Users] miserable time with Cisco ATA186 > Date: Fri, 4 Jun 2004 00:04:22 -0400 > Reply-To: [EMAIL PROTECTED] > > Noticed that he has ALAW set as the preferred codec on the ATA. I'd suggest > testing with allow of ulaw only, then try turning on other codecs. We know > that one works well. > > > > ==================================================================== > Timothy R. McKee > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling > Sent: Thursday, June 03, 2004 23:36 > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186 > > Perhaps, but *I* at least had decent luck with 2.16.1. I suspect he has > allow=all and the codec that ends up being used is G723.1 and then, of > course, everything goes to hell. > > > On Thu, 2004-06-03 at 22:59, brian k. west wrote: > > because 2.16.1 has some bugs.. you need 2.16.2 or higher. > > > > bkw > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
