also you have to set the sip.conf on the ATA sittings to disallow=all, allow=g729 OR set the txcodec and rxcodec to 3 on the ATA ----- Original Message ----- From: "Matthew Simpson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, June 04, 2004 8:52 AM Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186
> If I turn allow=ulaw on only, asterisk tries to use it > > a=rtpmap:0 PCMU/8000 > > but the ATA says it doesn't have it: > > Answering/Requesting with root capability 4 > Answering with non-codec capability 0x1(G723) > > If I turn allow=alaw on only or with allow=ulaw, asterisk sends it, the ATA > says it has it [alaw], but it still won't negotiate it. > > I think the stupid ATA is just determined to use G723 no matter what... I > have LBRCodec set to 3 which should have it try to use G729, but it still > tries to use G723. The AudioMode setting has a parameter bit to "Enable > G711 only", but I'm not sure how that bit thing works. Either the default > 0x00150015 or the recommended 0x00140014 fails. [btw, bit 1 should be "1" > to enable G711 only, if someone can help me there]. > > I'm seriously about to punt this thing into the garbage. > > Help! > > thanks, > matt > > > From: "Timothy R. McKee" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Subject: RE: [Asterisk-Users] miserable time with Cisco ATA186 > > Date: Fri, 4 Jun 2004 00:04:22 -0400 > > Reply-To: [EMAIL PROTECTED] > > > > Noticed that he has ALAW set as the preferred codec on the ATA. I'd > suggest > > testing with allow of ulaw only, then try turning on other codecs. We > know > > that one works well. > > > > > > > > ==================================================================== > > Timothy R. McKee > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling > > Sent: Thursday, June 03, 2004 23:36 > > To: [EMAIL PROTECTED] > > Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186 > > > > Perhaps, but *I* at least had decent luck with 2.16.1. I suspect he has > > allow=all and the codec that ends up being used is G723.1 and then, of > > course, everything goes to hell. > > > > > > On Thu, 2004-06-03 at 22:59, brian k. west wrote: > > > because 2.16.1 has some bugs.. you need 2.16.2 or higher. > > > > > > bkw > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
