DTMF=inband
Zac ----------------------------------------------------------------------- Zac Amsler, Technical Team WNOC.COM http://www.wnoc.com Phone: (989) 896-3329 X 2000 If you are receiving this e-mail as a respones to a technical issue, Please respond to me via the support e-mail address provided by your ISP. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Hill Sent: Friday, June 04, 2004 11:35 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] BroadVoice usage? On Fri, 4 Jun 2004, Michael Swan wrote: > Yes, we do have a context for incoming calls -- it's used for not only > BroadVoice (which isn't working) and VoiceGlo and iConnectHere (which > are working.) And, yes, we do have a pattern match on our number in our > [general] context in extensions.conf. As of this morning, when we dial > our BroadVoice number, we get a fast busy and our Asterisk server is > never contacted. similar thing happened when I tried to use voiceglo.. It appeared to be a problem in the provisioning of the phone number. Their tech support never responded to fix it, so I dumped 'em and now use Broadvoice instead. > As for outgoing, we did make the change to sip.broadvoice.com > (from proxy.broadvoice.com). This did make a change on our outgoing > calls: the BroadVoice server responded with: > Got SIP response 604 "Does not exist anywhere" back from 147.135.0.129 > This is progress but it's still an error. :-( And, no: our Asterisk > server is not behind a NAT firewall. I don't see fromuser= and fromdomain= in your config below.. try adding those. In the SIP debug, you'll probably see that your asterisk server is putting From : [EMAIL PROTECTED] in the messages to broadvoice. Their server doesn't like that; it wants to see From: [EMAIL PROTECTED] in the message. fromuser and fromdomain make that happen. PS, a question for Jay. What dtmf mode are you using? I haven't got dtmf working inbound or out yet. Greg > > > > At 03:04 AM 6/3/2004 -0500, you wrote: > >I have Broadvoice working on three lines. Had the same problems you > >have in the beginning. > > > >Trouble-shoot one thing at a time... > >Incoming: Do you have a context for incoming calls set up? It belongs > >in your [general] section. Once there, do you have a pattern or > >extension matching your phone number? If Asterisk can't match the > >extension for an incoming call, the call is rejected and BV tells you > >it's busy. > > > >Outgoing: Use host=sip.broadvoice.com. Don't use proxy. If your > >asterisk sits behind a NAT firewall, it wouldn't hurt to add "nat=yes" > >to your [broadvoice] section. > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] On Behalf Of Michael Swan > >Sent: Tuesday, June 01, 2004 11:51 AM > >To: [EMAIL PROTECTED] > >Subject: [Asterisk-Users] BroadVoice usage? > > > > > >Hi all, > > > >I've been trying to use BroadVoice as a SIP service provider. They don't > > > >officially > >support * but are helpful when it comes to answering questions for setup > >parameters. They claim they have no firewalls or access lists that need > >to be set up so I can get access to their servers. > > > >However, something's still not quite right when I use the parameters. It > >looks like our Asterisk server is registered with their server and I > >believe I have all the other entries set up correctly (we use other > >services, too, such as iConnectHere and Voiceglo so I'm pretty sure I've > >got my BroadVoice set up correctly.) "sip show registry" shows my * > >server as registered with the BroadVoice IP address. > > > >When I try to make an outbound call, there is no answer from the > >BroadVoice server (proxy.boradvoice.com) to Asterisk's INVITE. > > > >When I try to call our assigned BroadVoice number, I immediately get a > >BroadVoice message saying the number is busy. > > > >I can provide the sip debug output but it basically shows that > >BroadVoice appears to be not communicating with inbound or outbound > >requests. > > > >Here are the entries: > > > >sip.conf > > > >register => phonenumber:[EMAIL PROTECTED]:5060/phonenumber > > > >[broadvoice] > >type=friend > >username=phonenumber > >secret=password > >host=proxy.broadvoice.com > >dtmfmode=inband > >disallow=all > >allow=ulaw > >allow=alaw > > > >extensions.conf > > > >; calls via BroadVoice > >exten => _6NXXXXXX,1,Dial,SIP/1925${EXTEN:[EMAIL PROTECTED] > >exten => _61NXXNXXXXXX,1,Dial,SIP/${EXTEN:[EMAIL PROTECTED] > >exten => _6011.,1,Dial,SIP/${EXTEN:[EMAIL PROTECTED] > >exten => _6.,2,Congestion > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
BEGIN:VCARD VERSION:2.1 N:Amsler;Zac FN:Zac Amsler ([EMAIL PROTECTED]) ORG:WNOC.COM;Technical Developement TITLE:Technical Team TEL;WORK;VOICE:+1 (989) 896-3329 x 2000 TEL;WORK;VOICE:+1 (989) 530-3329 x 1010 TEL;CELL;VOICE:+1 (435) 731-0838 URL;WORK:http://www.wnoc.com EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20040530T061922Z END:VCARD
