That's good to know. However, if I call into my broadvoice number and pick up the call, I can send and receive DTMF audibly. Shouldn't that fall under "inband" signaling and should be taken care of by the appropriate dtmfmode setting?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Swan Sent: Tuesday, June 08, 2004 2:28 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] BroadVoice usage? Hi, I have a current call into BroadVoice regarding lack of DTMF on incoming calls. They are aware of the situation but have yet to respond. Michael Swan Neon Software, Inc. At 12:48 PM 6/8/2004 -0500, you wrote: >I have to correct myself here -- this is no longer working. I know I >had it working from my cell-phone at first. What's interesting is that >I can HEAR the DTMF go through, both from cell-phone and other sip >lines. I changed it back to inband, but no luck. > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Jay Milk >Sent: Tuesday, June 08, 2004 11:46 AM >To: [EMAIL PROTECTED] >Subject: RE: [Asterisk-Users] BroadVoice usage? > > >I do, see sip.conf below. My network is multi-NAT, so all DHCP'd >machines have one external IP to share, and a small number of servers >(including *) get a static internal IP which maps to a static external >IP. > >[general] >port = 5060 ; Port to bind to >bindaddr = 192.168.254.204 ; Address to bind SIP channel to >context = incoming ; Default context for incoming calls >disallow=all ; Disallow all codecs >allow=gsm >allow=ulaw ; Allow codecs in order of preference >allow=alaw >externip = x.x.x.149 ; Address that we're going to put in >outbound SIP messages > ; if we're behind a NAT >localnet = 192.168.254.204 ; Internal NETWORK address >localmask = 255.255.255.0 ; Internal netmask > ; The externip, localnet and localmask >is used > ; when registering and communication >with other proxies > ; that we're registered with nat=yes > >register => xxxxxxx:[EMAIL PROTECTED]/99049 >register => xxxxxx:[EMAIL PROTECTED]/99393 >register => 5551231234:[EMAIL PROTECTED]/99555 >register => 5561231234:[EMAIL PROTECTED]/99556 >register => 5571231234:[EMAIL PROTECTED]/99557 > >[sip99555] >secret=password >username=5551231234 >host=sip.broadvoice.com >type=peer >nat=yes >canreinvite=no >dtmfmode=rfc2833 >fromuser=5551231234 >callerid=5551231234 >context=incoming >fromdomain=sip.broadvoice.com > >(rings to sipura SPA-2000:) > >[24] >type=friend >username=24 >secret=password >;mailbox=1000 >host=dynamic >context=internal >dtmfmode=rfc2833 >qualify=250 >canreinvite=no >callerid="Office" <24> > >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Michael >Swan >Sent: Monday, June 07, 2004 12:24 PM >To: [EMAIL PROTECTED] >Subject: RE: [Asterisk-Users] BroadVoice usage? > > >Hi Greg, > >Thanks for the fromuser= and fromdomain= hints. Adding those cleared up >the problem and we can make and receive calls now. > >However, as with Voiceglo, BroadVoice seems to ignore DTMF on incoming >calls. It does send DTMF on outgoing calls. I've tried all three >dtmfmode values in sip.conf leaving the setting at inband which seems >to work for outgoing. > >Does anyone else receive DTMF on incoming calls with their BroadVoice >account? > >Michael Swan >Neon Software, Inc. > >At 10:35 PM 6/4/2004 -0600, you wrote: > >On Fri, 4 Jun 2004, Michael Swan wrote: > > > > > Yes, we do have a context for incoming calls -- it's used for not > > > only BroadVoice (which isn't working) and VoiceGlo and > > > iConnectHere (which are working.) And, yes, we do have a pattern > > > match on our number in our [general] context in extensions.conf. > > > As of this morning, when we dial our BroadVoice number, we get a > > > fast busy and our Asterisk server is never contacted. > > > >similar thing happened when I tried to use voiceglo.. It appeared to > >be > > >a problem in the provisioning of the phone number. Their tech support > >never responded to fix it, so I dumped 'em and now use Broadvoice > >instead. > > > > > As for outgoing, we did make the change to sip.broadvoice.com > > > (from proxy.broadvoice.com). This did make a change on our > > > outgoing > > > calls: the BroadVoice server responded with: > > > Got SIP response 604 "Does not exist anywhere" back from > > 147.135.0.129 > > > This is progress but it's still an error. :-( And, no: our > > > Asterisk server is not behind a NAT firewall. > > > >I don't see fromuser= and fromdomain= in your config below.. try > >adding > > >those. In the SIP debug, you'll probably see that your asterisk > >server is putting From : [EMAIL PROTECTED] in the messages to > >broadvoice. Their server doesn't like that; it wants to see From: > >[EMAIL PROTECTED] in the message. fromuser and fromdomain > >make that happen. > > > > > >PS, a question for Jay. What dtmf mode are you using? I haven't got > >dtmf working inbound or out yet. > > > >Greg > > > > > > > > > > > > > > > > At 03:04 AM 6/3/2004 -0500, you wrote: > > > >I have Broadvoice working on three lines. Had the same problems > > > >you have in the beginning. > > > > > > > >Trouble-shoot one thing at a time... > > > >Incoming: Do you have a context for incoming calls set up? It > > > >belongs in your [general] section. Once there, do you have a > > > >pattern or extension matching your phone number? If Asterisk > > > >can't > > > > >match the extension for an incoming call, the call is rejected > > > >and BV tells you it's busy. > > > > > > > >Outgoing: Use host=sip.broadvoice.com. Don't use proxy. If your > > > >asterisk sits behind a NAT firewall, it wouldn't hurt to add > > > >"nat=yes" to your [broadvoice] section. > > > > > > > >-----Original Message----- > > > >From: [EMAIL PROTECTED] > > > >[mailto:[EMAIL PROTECTED] On Behalf Of > > > >Michael > > > > >Swan > > > >Sent: Tuesday, June 01, 2004 11:51 AM > > > >To: [EMAIL PROTECTED] > > > >Subject: [Asterisk-Users] BroadVoice usage? > > > > > > > > > > > >Hi all, > > > > > > > >I've been trying to use BroadVoice as a SIP service provider. > > > >They don't > > > > > > > >officially > > > >support * but are helpful when it comes to answering questions > > > >for setup parameters. They claim they have no firewalls or access > > > >lists > > > > >that need to be set up so I can get access to their servers. > > > > > > > >However, something's still not quite right when I use the > > > >parameters. It looks like our Asterisk server is registered with > > > >their server and I believe I have all the other entries set up > > > >correctly (we use other services, too, such as iConnectHere and > > > >Voiceglo so I'm pretty sure I've got my BroadVoice set up > > > >correctly.) "sip show registry" shows my * server as registered > > > >with the BroadVoice IP address. > > > > > > > >When I try to make an outbound call, there is no answer from the > > > >BroadVoice server (proxy.boradvoice.com) to Asterisk's INVITE. > > > > > > > >When I try to call our assigned BroadVoice number, I immediately > > > >get a BroadVoice message saying the number is busy. > > > > > > > >I can provide the sip debug output but it basically shows that > > > >BroadVoice appears to be not communicating with inbound or > > > >outbound > > > > >requests. > > > > > > > >Here are the entries: > > > > > > > >sip.conf > > > > > > > >register => > > > >phonenumber:[EMAIL PROTECTED]:5060/phonenumber > > > > > > > >[broadvoice] > > > >type=friend > > > >username=phonenumber > > > >secret=password > > > >host=proxy.broadvoice.com > > > >dtmfmode=inband > > > >disallow=all > > > >allow=ulaw > > > >allow=alaw > > > > > > > >extensions.conf > > > > > > > >; calls via BroadVoice > > > >exten => _6NXXXXXX,1,Dial,SIP/1925${EXTEN:[EMAIL PROTECTED] > > > >exten => _61NXXNXXXXXX,1,Dial,SIP/${EXTEN:[EMAIL PROTECTED] > > > >exten => _6011.,1,Dial,SIP/${EXTEN:[EMAIL PROTECTED] > > > >exten => _6.,2,Congestion > > > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
