On Mon, 14 Jun 2004, Shoval Tomer wrote:If you mean connecting the X100P to an analog extension line then that will work both for incoming and outgoing. Note that the KX-TD1232 analog lines do not provide caller id, at least ours do not.Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX?
That's a shame- what protocol do they use? DTMF? http://voip-info.org/wiki-Asterisk+bounty+non-Bellcore-CLID
Another option could be to connect Asterisk using an internal isdn
extension. We have a few isdn modems hanging off our pbx that way and they
get callerid etc so Asterisk should be able to as well. We interface
Asterisk to our pbx using a pri line instead so I have not tried using a bri line myself.
Do you use the TD-1232's 'T1' interface, then? - with what PRI card? Digium or Cisco or what? - does it support Q.931?
Their webpage is vague as to exactly what they mean by 'T1' http://catalog2.panasonic.com/webapp/wcs/stores/servlet/ModelDetail?displayTab=F&storeId=11251&catalogId=11005&itemId=62983&catGroupId=11112&modelNo=KX-TD1232&surfModel=KX-TD1232&ignoreRedirect=1
Thanks for any extra information - I need to interface * with one of these in 2 locations.
F _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
