We also are working to interface a Panasonic pbx with a pri.
Calls from * to Panasonic via pri suport caller id and DID.
However, I have not found a way to forward calls out the pri without manually dialing the trunk group for the pri and then the extension number.
I have overlap dialing enabled in the panasonic.
Any tips to make say a specific extension able to forward to the pri with destination digits getting sent?
Peter Svensson wrote:
On Mon, 14 Jun 2004, Shoval Tomer wrote:
Here's my question: Can I use a Wildcard X100P to connect an outgoing line jack (on the Panasonic) to Asterisk, so I can route calls from the PBX to Asterisk, and calls from Asterisk to the PBX?
If you mean connecting the X100P to an analog extension line then that will work both for incoming and outgoing. Note that the KX-TD1232 analog lines do not provide caller id, at least ours do not.
Another option could be to connect Asterisk using an internal isdn
extension. We have a few isdn modems hanging off our pbx that way and they
get callerid etc so Asterisk should be able to as well. We interface
Asterisk to our pbx using a pri line instead so I have not tried using a bri line myself.
Peter -- Peter Svensson ! Pgp key available by finger, fingerprint: <[EMAIL PROTECTED]> ! 8A E9 20 98 C1 FF 43 E3 07 FD B9 0A 80 72 70 AF ------------------------------------------------------------------------ Remember, Luke, your source will be with you... always...
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
--
respectfully, Joseph -------------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
