On Wed, 2004-06-16 at 19:30, Ryan Courtnage wrote: > I do notice that ALL outgoing calls on > both my servers, never report the channel state accurately: > > show channels > Channel (Context Extension Pri ) State Appl. > Data > Zap/3-1 (from-pstn s 1 ) Dialing AppDial > (Outgoing Line) > SIP/204-e466 (from-internal 92442790 1 ) Ring Dial > ZAP/g0/2442790|| > 2 active channel(s) > *CLI> > > That Zap/3-1 should have a state of UP, not Dialing. I noticed this > before, and just ignored it ... but perhaps it is the root of the > problem? Does * send special sip headers when a channel's state is UP? > Perhaps the Uniden has a internal timeout, after which it will play a > congestion tone?
Bingo - I pulled a CVS * from late May, which doesn't have the above problem. Now states show as UP when I dial out. This fixed my remote IVR and my call disconnect problems! The new firmware from Uniden seems to have made the rebooting problem go away too. So - the UIP200 now looks AND works good :-) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
