I have an X100P card and Asterisk installed on a system running Redhat 8. I have a normal phone line plugged into a wall jack on one end, and plugged into the "Line" port on the X100P card on the other end. I am trying to make an outgoing call to a local phone number using a *.call file but I can not seem to get it to dial the number I want it to. This is the call file I am using (with 966-1443 being the number I would like to dial):
Channel: Zap/1/9661443
Callerid: Nagios
MaxRetries: 1
RetryTime: 60
WaitTime: 30
Context: alert
Extension: s
Priority: 1
And this is the extensions.conf file at the "alert" context:
[alert]
exten => s,1,DigitTimeout,5
exten => s,2,ResponseTimeout,10
exten => s,3,Answer
exten => s,4,Wait(1)
exten => s,5,Playback(tt-somethingwrong)
exten => s,6,Playback(vm-goodbye)
exten => s,7,Hangup
The card is set up on channel 1, and the number I am trying to dial would be 966-1443. When I put the call file in the /var/spool/asterisk/outgoing directory I get the message:
Jun 24 11:30:59 NOTICE[237585]: Call completed to Zap/1/9661443
However, the phone with the number 966-1443 does not ring. If anyone could shed some light on the situation and help me solve my problem it would be greatly appreciated. Thank-you.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
