Hello All, I have finally pulled CVS HEAD and built it with app_rxfax and app_txfax to try to solve the problem that I was having with blank faxes. Fortunately, I am finally getting logs from rxfax. Unfortunately, I am still not receiving faxes correctly. Here is the log that was produced. If anyone has any thoughts on what might going, I would greatly appreciate it.
Thanks, Patrick Start receiving document Changed from phase 1 to 4 Sending ident >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Minimum scan line time for higher resolutions: T15.4 = T7.7 >>> DIS: 80 00 ce f0 80 80 01 HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up Slow carrier down Slow carrier up <<< TSI: 43 2c 73 65 67 6f 6c 6f 6e 68 63 65 54 20 74 78 65 74 6e 6f 43 TSI without final frame tag Remote fax gave TSI as: "Context Technologes," <<< DCS: 83 00 c6 70 DCS with final frame tag In state 9 DCS: Can receive fax Selected data signalling rate: V.29, 9600bps R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 0ms Get at 9600 Changed from phase 3 to 5 Slow carrier down Fast carrier up Coarse carrier frequency 1700.00 (66) Training error 6.440041 Training succeeded (constellation mismatch 8.504586) Fast carrier trained Fast carrier down Changed from phase 5 to 4 Start rx document - compression 2 Start rx page >>> CFR: 84 HDLC underflow in state 5 Post trainability Changed from phase 4 to 5 Fast carrier up Coarse carrier frequency 1700.22 (66) Training error 8.812362 Training succeeded (constellation mismatch 14.974447) Fast carrier trained Fast carrier down Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 172 (got 1910, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 174 (got 1739, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 175 (got 1736, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 176 (got 1811, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 177 (got 1989, expected 1728). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 179 (got 88, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 180 (got 3553, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 182 (got 2621, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 183 (got 1853, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 185 (got 1729, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 186 (x 1280). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 186 (got 1280, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 187 (got 1729, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 190 (got 1729, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 193 (x 0). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 193 (got 0, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 195 (got 3658, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 196 (got 1764, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 198 (got 2128, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 199 (got 1761, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 200 (got 1934, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 201 (got 1729, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 203 (x 1211). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 203 (got 1211, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 204 (x 246). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 204 (got 246, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 206 (got 2513, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 207 (got 3277, expected 1728). Fax3Decode2D: (FakeInput): Uncompressed data (not supported) at scanline 208 (x 247). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 208 (got 247, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 210 (got 1846, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 211 (got 2131, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 213 (got 1730, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 214 (x 172). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 214 (got 172, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 216 (x 8). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 216 (got 8, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 217 (got 2147, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 219 (got 2818, expected 1728). Fax3Decode2D: Warning, (FakeInput): Line length mismatch at scanline 220 (got 1752, expected 1728). Fax3Decode2D: (FakeInput): Bad code word at scanline 221 (x 1663). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 221 (got 1663, expected 1728). Fax3Decode2D: Warning, (FakeInput): Premature EOL at scanline 225 (got 0, expected 1728). Page 1 of /var/spool/asterisk-fax/fax-3488-20040628-223319.tif: 226 rows received 0 total bad rows 0 max consecutive bad rows Changed from phase 5 to 3 Slow carrier up <<< EOP: 2f EOP with final frame tag In state 5 Changed from phase 3 to 4 >>> MCF: 8c HDLC underflow in state 8 Changed from phase 4 to 3 Slow carrier up <<< DCN: fb DCN with final frame tag In state 8 Disconnecting Changed from phase 3 to 7 Changed from phase 7 to 8 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Steve Underwood Sent: Thursday, June 17, 2004 12:23 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Blank faxes with RxFAX Hi Patrick, I can't tell much from this brief description. Send me a console log. Regards, Steve Patrick J. Conroy wrote: >Hello All, > >I have downloaded and installed spandsp and downloaded rxfax, etc and >rebuilt asterisk with app_rxfax. I have added the following to my >extensions.conf: > >[macro-faxreceive] >; ${ARG1} - sendto e-mail >exten => s,1,Wait(2) >exten => s,2,Answer >exten => >s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) >exten => s,4,SetVar(EMAILADDR=${ARG1}) >exten => s,5,rxfax(${FAXFILE}.tif) >exten => s,6,system(/usr/local/sbin/mailfax ${FAXFILE} ${EMAILADDR} >"${CALLERIDNUM} ${CALLERIDNAME}") > >And everything looks like it is running fine, meaning that I don't seem to >get any errors. > >However, all the faxes seem to be blank. The only references to anything >like this that I could find previously on the list were in regards to 8-byte >tif files. This doesn't seem to be the same issue, since the files are much >larger (~8k). I am trying to receive the faxes over a PRI running into a >TE405P. Any suggestions? Is anyone using RxFAX successfully in a >configuration like this? If so, what are you doing differently? Any help >would be appreciated. > >Thanks, >Patrick > > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- This message has been scanned for viruses and dangerous content, and is believed to be clean. -- This message has been scanned for viruses and dangerous content, and is believed to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
