Okay, so I finally found the problem that I was having with RxFAX receiving blank and mangled faxes. It turns out that it was caused by the timing source set wrong. I have a TE405P with span 1 running to a channel bank, a PRI (which the faxes were coming over) running into span 2, and an internet T1 running into span 3. I had span 3 set as the timing source. I changed timing to 0 on span 3 and set timing to 1 on span 2, rebooted and everything works perfectly. Hopefully, this will help some of the other people that were having the same problems.
Patrick -- This message has been scanned for viruses and dangerous content, and is believed to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
