Regardless of what you send in callerid, your PRI has a phone number associated with it that you don't see, but is used for billing. This is so you cannot spoof the LD company into thinking the call came from somewhere other than from you. I believe the PRI provider can provision the PRI to use either this "hard-wired" callerid , or the one you provide. It sounds to me like your PRI is provisioned as the former. I would talk to your PRI provider and see if they agree and are willing to change this.
Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815 On Tue, 29 Jun 2004, McInnis, JP wrote: > > For outgoing calls made on our PRI circuit we are setting the Caller ID > using the format > > Exten => _9XXXXXXX,1,SetCallerID(1601XXXXXXX) > > The monitor shows that the CallerID is being set to the specified > number, but yet when the call is received on the user end the ID is > always the base number of our DID. For example we have 8600-8650 as > DID's but the callerid is always 8600 regardless of the extension that > makes the outgoing call. > > We have tried using the variable SetCallerID(${BYEXTENSION}) but still > get the same results. > > Any suggestions? > > > JP McInnis, Director of Technology > Copiah Lincoln Community College > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users