Hello all- This is probably easy, but I am trying to figure out why I cannot use app record. In fact, the problem seems to extend to when using a sip soft phone also. I always get this error, and haven't been able to find much about it.
I have a number coming in from nufone. I have tryied setting the codec and also leaving it out. See config below: ; answer the line exten => <number>,1,SetVar(SIP_CODEC=ulaw) exten => <number>,2,Wait(2) exten => <number>,3,Answer exten => <number>,4,ResponseTimeout(15) exten => <number>,5,Background(pls-wait-connect-call) I then have a recording section: exten => 205,1,Wait(2) exten => 205,2,Playback(all-your-base) ;exten => 205,2,Playback(/usr/local/asterisk/var/lib/asterisk/sounds/hello-recording) exten => 205,3,Record(/usr/local/asterisk/var/lib/asterisk/sounds/hello-recording:gsm ,2) exten => 205,4,Wait(1) exten => 205,5,Playback(/usr/local/asterisk/var/lib/asterisk/sounds/hello-recording) exten => 205,6,Wait(1) exten => 205,7,Hangup I always get the following error: channel.c:1508 ast_set_read_format: Unable to find a path from ULAW to UNKN In iax.conf I have disallow=all allow=ulaw I have tried replacing all references to ulaw with gsm. Same results. I have used cvs head and also 0.9.0. Ideas? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
