Thank you so much! That was exactly what I needed to know! Cheersm Wiley
-----Original Message----- From: Tor Roberts [mailto:[EMAIL PROTECTED] Sent: Monday, July 19, 2004 3:35 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Polycom IP 500 Voicemail Wiley, I don't have any 500s, but I use 600s, which use the same file I think. Here is my digitmap: <digitmap dialplan.digitmap="9[2-9]xxxxxx|91xxxxxxxxxx|85xx|[5-7]xx|9411|9911" dialplan.digitmap.timeOut="3"/> What this says is that if I dial 9, then a 7 digit local number, I don't need to hit send. If I dial 91, then 10 digit long distance number, I don't need to hit send. If I dial extension 85 plus any 2 digits ex., 8523, I don't need to hit send. If I dial extension 5,6, or 7 plus 2 digits, ex. 635, I don't need to hit send. And if I dial 9411, or 9911 (info or emergency) I don't need to hit send. Hope this helps. -Tor Wiley E. Siler wrote: >I read the administrator document repeatedly. I have not been able to >find a wiki that applied to digitmap feature at all and I have searched >repeatedly and read several of the wikis regarding Polycoms. The >administrators guide doesn't have enough context explanation to make the >use of the digitmap understandable. > >That is the basis of my request for a digitmap explanation. I am not >asking someone to write mine for me. I am asking to see an example and >an explanation that gives context so I can write my own and know I have >done it properly. My PBX is Asterisk and the setup is about as generic >as generic can be. Polycoms over SIP to the PBX. > >If you know where the wiki is for digitmaps please send it. If you feel >inspired, a short explanation of the relevance and context of digitmaps >would be greatly appreciated. I know everyone has to take their own >time to answer these emails and I truly appreciate that. That is why I >do my research until I hit a wall, then I will ask here. I appreciate >whatever you can spare time for. > >Thanks! >Wiley > > > >-----Original Message----- >From: Brent Franks [mailto:[EMAIL PROTECTED] >Sent: Monday, July 19, 2004 10:26 AM >To: [EMAIL PROTECTED] >Subject: RE: [Asterisk-Users] Polycom IP 500 Voicemail > > > >>Thank you! >> >>Can you tell me more about the dial plan feature? How do you setup >> >> >the > > >>correct digitmap? >> >> >> > >Check the Administrator's Document. You can find it on the Wiki, under >IP Phones.. Polycom. Did you try to look up the digitmap feature before >sending this post? If not, you should be able to understand it when you >read it, it's relatively straight forward. > >No one can setup a correct digitmap for you, as it will vary greatly on >how you have setup your PBX. > >- Brent > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
