[Asterisk-Users] roblems with Junghanns QuadBri

[Edwig Knol]

Title: Message

I installed the QuadBri card in my * server.

I'm installing * on a RedHat 9 server

 

I run the install.sh file. So far no problems.

 

If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf

 

I will see the following error:

 

Zaptel Configuration
======================

 

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)

 

12 channels configured.

 

Notice: Configuration file is /etc/zaptel.conf
line 18: Unable to open master device '/dev/zap/ctl'

 

Does anybody know what I do wrong?

 

To be complete These are the configuration files:

 

[zaptel.conf]

loadzone=nl
defaultzone=nl
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami

 

bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12

[zapatel.conf]

[channels]

 

;
; ISDN quadBRI interfaces
;

 

switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 1
context=to-pstn
channel => 1-2

 

switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=to-pstn
channel => 4-5

To me it looks all fine.