I think your kernel module isn't loaded for your card. Once those get loaded, the stuff in /dev gets created.
Look in /lib/modules/<kernel number>/misc for the kernel modules Do a 'demod -a' first and then you can do a blanket modprobe like this: modprobe \* It'll pretty much load all your modules that it can. You can then do a 'dmesg' and see if it says anything about it finding your hardware. If you know which module is it, you can just do 'modprobe <module name> without the .o or .ko. On Wed, 2004-07-21 at 11:48, Edwig Knol wrote: > I installed the QuadBri card in my * server. > I'm installing * on a RedHat 9 server > > I run the install.sh file. So far no problems. > > If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf > > I will see the following error: > > Zaptel Configuration > ====================== > > SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1) > SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1) > > 12 channels configured. > > Notice: Configuration file is /etc/zaptel.conf > line 18: Unable to open master device '/dev/zap/ctl' > > Does anybody know what I do wrong? > > To be complete These are the configuration files: > > [zaptel.conf] > loadzone=nl > defaultzone=nl > # qozap span definitions > # most of the values should be bogus because we are not really zaptel > span=1,1,3,ccs,ami > span=2,0,3,ccs,ami > span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > > [zapatel.conf] > [channels] > > ; > ; ISDN quadBRI interfaces > ; > > switchtype = euroisdn > signalling = bri_cpe_ptmp > pridialplan = local > group = 1 > context=to-pstn > channel => 1-2 > > switchtype = euroisdn > signalling = bri_cpe_ptmp > pridialplan = local > group = 2 > context=to-pstn > channel => 4-5 > > To me it looks all fine. > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users